TGS821 - Special Sensor for Hydrogen Gas Features * High sensitivity and selectivity to hydrogen gas * Good repeatability in measurement and excellent stability * Uses simple electrical circuit * Ceramic base resistant to severe environment Applications * Hydrogen gas detection f
Week Technology LTD [2017-05-24 15:01:57 ]
If anyone inhale any oil suction vapor mist or air suspended particles, please take emergency measures of ventilation. Avoid contacting with eyes, skin and respiratory system. When you deal with the products, you\'d better take up the safty shoes and other safe handling equipment
SKALN LUBRICANT OIL [2017-05-24 14:38:07 ]
Product performance Excellent UV resistance and thermal stability; Has good oxidation stability and chemical stability; Good abrasion resistance and corrosion resistance. Product application Industrial grade white oil for chemical fiber,synthetic fiber and other
SKALN LUBRICANT OIL [2017-05-24 14:02:06 ]
Product performance Selected sulfur-phosphorus compound additives, with excellent anti-wear properties and carrying capacity, can cope with a variety of harsh conditions, such as heavy-duty car climbing and brakes; Outstanding heat-resisting and oxidation
SKALN LUBRICANT OIL [2017-05-24 14:00:14 ]
Special clamping claw, and the design of the clamping ring is concave and convex clasped with forced tight head assembly time-savers, cable clamping range is big, strong tensile resistance, can waterproof, dustproof, salt resistance, resistance to acid and alkali, alcohol, grease
Shanghai ShengYang Electronic Technology Co., Ltd. [2017-05-24 13:38:22 ]
PRODUCTION PROCESS It is manufactured by permanently bonding two or more lites of glass with layers of polyvinyl butyral (PVB) interlayer, under heat and pressure, to create a single construction. FEATURE 1. Safety. Even if the glass is broken, the tough interlayer film prevents
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:57:02 ]
PRODUCTION PROCESS with the nitric acid etching one side or both sides of the glass to obtain concave-convex effect, it can also be tempered. FEATURE 1. Distinctive, uniformly smooth and satin-like appearance 2. Same light transmittance as the equivalent thickness of ordinary flo
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:48:24 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:47:56 ]
Including low iron float glass and low iron patterned glass. LOW IRON FLOAT GLASS BRIEF INTRODUCTION Low iron float glass is also called ultra clear glass, high transmittance glass. It is a new type of high grade glass that has high performance and multifunction. It has the chara
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:47:24 ]
Borosilicate Float Glass2.6(BG26) Characteristics 1.Great heat resitance performance, stable chemical property; 2.High light transmission. Application 1.Household electrical appliance. 2.Fireplace glass. Technical Data Dimensions(mm) 1200x600,1200x900,1200x1800,othe format upon r
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:46:56 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad ,such as the silica sand ,soda ash,salt cake, dolomite,etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into g
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:46:24 ]
PRODUCTION PROCESS The same as in float glass production. The only variation is the colorants mixed at the beginning with the standard raw materials. Different additives may produce differently colored glasses. FEATURE 1. It can be bent, tempered or heat strengthened and in addit
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:45:54 ]
PRODUCTION PROCESS Insulated glass (IGU) is also called multi-layered glass. It is composed of two sheets of float glass or other kinds of glass, between the two sheets of glass, there is an aluminum spacer filled with desiccant. The aluminum spacer and sheets of glass are adhere
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:44:56 ]
PRODUCTION PROCESS Insulated glass (IGU) is also called multi-layered glass. It is composed of two sheets of float glass or other kinds of glass, between the two sheets of glass, there is an aluminum spacer filled with desiccant. The aluminum spacer and sheets of glass are adhere
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:43:59 ]
PRODUCTION PROCESS What\'s Low-E Glass? Low emissivity coated glass is also called Low-E glass. There are two types of Low-E glass hard coat and soft coat. Hard coat Low-E glass is manufactured by pouring a thin layer of molten tin onto a sheet of glass while the glass is still s
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:43:31 ]
PRODUCTION PROCESS It is manufactured by permanently bonding two or more lites of glass with layers of polyvinyl butyral (PVB) interlayer, under heat and pressure, to create a single construction. FEATURE 1. Safety. Even if the glass is broken, the tough interlayer film prevents
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:42:28 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:41:51 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:41:19 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:40:47 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:40:15 ]
