alpha:f* - Manufacturers, Suppliers & Exporters
Functions BD-1000M-2TX can interconvert the electric signal of 10M/100M/1000M twisted pair and the optical signal of 1000Base-FX/LX. It extends the network transmission range from 100m to 80Km (single mode optical fiber). Features Product specifications 2 conforms to IEEE802.3, I
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 11:20:31 ]
Overview BD-100M-POE is a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered ov
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 11:18:43 ]
Description 10/100M ethernet fiber media converter translates transmission signals from a twisted-pair 10/100Base-Tx to 10/100Base-FX fiber optical cable. It has SNMP based intelligent network management,by which user can monitor and configure the copper port and the optical port
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 11:17:47 ]
Model：XZMJ Characteristics This plant is unitized with an evaporator and sterilizer, which has combined function of increase concentration and sterilization. Gelatin liquor are evaporated to higher concentration more than 30% by force circulating evaporator and then heated up t
Tianjin Wanfeng Chemical Engineering Equipment Co Ltd [2018-09-11 11:16:59 ]
Characteristics： Tri-effect evaporation plant with thermal vapour re-compressor has specific steam consumption 27%, which is better than 34% of tri-effect evaporator. It is equivalent to four-effect evaporator. It is high heat efficiency and save energy. The product auto-fast f
Tianjin Wanfeng Chemical Engineering Equipment Co Ltd [2018-09-11 11:16:19 ]
Description Baudcom BD-100M-LFP series Ethernet Media Converter translates transmission signals from a twisted-pair 10/100Base-Tx to 10/100Base-FX fiber optical cable. The media converter can support LFP function (Link Fault Pass through),and jumbo frame. Features Conforms to IEE
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 11:16:17 ]
Characteristics： Membrane filter (UF) is a membrane separator technology. The gelatin solution flows upon membrane, water and soluble inorganic low-molecular hydrolysis materials are going to the low pressure part from high pressure part. The solution being across over membrane
Tianjin Wanfeng Chemical Engineering Equipment Co Ltd [2018-09-11 11:15:11 ]
The cellulose filter is for application in filtration of gelatin solution, which can also be used for beer, drinks, fruit juice and so on, which is with cellulose cake as filtration medium. The frame dimension is 500mm, hydraulic operating and easy to operate.
Tianjin Wanfeng Chemical Engineering Equipment Co Ltd [2018-09-11 11:14:05 ]
Product function transmit10/100Base-T Ethernet electrical signal through fiber, realize TX/FX converter Features 4 UTP port,1 fiber port; Conforms to IEEE802.3,IEEE802.3u (10Base-T,100Base-TX,100BaseT-FX) international standard; support single fiber or dual fiber optical port; br
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 11:10:48 ]
Overview The WDM media converter is designed to convert data signal between 10/100 Base-TX and 100 Base Fx Fast Ethernet. The WDM(single fiber) takes only one fiber cable to transmit and receive data, which will save half cabling cost for you transmit10/100Base-T Ethernet electri
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 11:08:44 ]
Model RDI-5000 RDI-10000 Characteristics The Resin Ion-Exchange Plant is applied to the treatment of gelatin solution which is to reduce the inorganic Ion, so as to reduce the ash content. The gelatin solution flows through the two ion-exchange tanks, which are filled with cation
Tianjin Wanfeng Chemical Engineering Equipment Co Ltd [2018-09-11 11:08:04 ]
Description Baudcom BD-100M series Ethernet Media Converter translates transmission signals from a twisted-pair 10/100Base-Tx to 10/100Base-FX fiber optical cable. It has SNMP based intelligent network management,by which user can monitor and configure the copper port and the opt
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 11:07:52 ]
RJ45 Port 10/100M Self-adaption, Full/half Duplex, MDI/MDIX Auto connection Wide-range working temperature IP 40 Industrial power design, Over Voltage, over current protection. LED Lights DIN-Rail mounting, wall mounting Fiber Ports 100Base-FX (SC/ST/FC connector)
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 11:05:45 ]
Description Baudcom, BDTR-024L transceiver is a series Single mode fiber module designed for optical data communication applications. It is electrically compatible with the two fibers MSA transceiver. The transceiver can achieve up to 40km point-to-point multimode fiber applicati
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 11:02:49 ]
Feature s u Compact & Light weight u Fully Automatic Operation u 5000m altitude ensures Splice Quality u SYSTEM TEST ensures the best working condition u Color LCD monitor u Pause function, convenient for scientific research u Store 8000 groups of splice results u USB&DC interfa
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 09:50:09 ]
MODEL BD-IF400 General Description Features ● Indicate the signal directions in fiber; ● Indicate the signal presence or absence(Live or dark fiber); ● Detect tones 270Hz, 1kHz and 2kHz to verify the modulated signal type; ● Suitable for 0.25, 0.9, 2.0, 3.0mm fiber,and no
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 09:43:18 ]
Fiber Optic Cleaner Mini Designed to specially work well with the SC, FC, and ST connectors, this instrument cleans the ferrule end faces removing dust, oil, and other debris without nicking or scratching the end face. Features Easy pushing motion engages connector and initiates
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 09:38:31 ]
Feature ◆ Systemization Products of various capacities can meet multiple application requirements. We also offer optical accessories for outdoor cross-connect cabinet, patchcords, pigtails, adaptors, splitters for example, and provide turnkey solutions for installation, splicin
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 09:37:29 ]
The fiber terminal is used to connect the fiber in the house and it can be hanged on the wall or fixed on the floor. the body is made of steel plate with rot-resistant coating For meeting the new development of communication network, the products considered to be new small distri
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 09:35:57 ]
1x2(2x2) WDM Splitter Applications WDM systems CATV Description Optical fiber splitter is used to split the fiber optic light into several parts at a certain ratio . The fiber optic splitter is an important passive component used in PON FTTX networks. 1310/1550nm WDM can be used
Shanghai Baudcom Communication Device Co.,Ltd [2018-09-11 09:33:32 ]
