Searching alpha:[0* TO 9*] , total 380122 products,queries done in 15 ms
Fig 600 Hammer Union

Working Pressure 6,000psi(414 bar) Features Bronze seat provides primary seal;will not rust in water services Recommended Service Steam service, boiler connections, manifold, and line connections for production, drilling, and well servicing As one of the most professional oil & g

DEZHOU RUNDONG PETROLEUM MACHINERY CO., LTD      [2023-04-17 09:34:02 ]

Tobee® Mission 4x3x13 Centrifugal Pump and Frac Pump

Tobee ® Mission Sandmaster Pumps Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8

Hebei Tobee Pump Co.,Limited·      [2023-04-14 19:35:17 ]

Tobee® Mission 4x3x13 Centrifugal Sand Pump

Tobee ® Mission Sandmaster Pumps Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8

Hebei Tobee Pump Co.,Limited·      [2023-04-14 19:32:56 ]

TGJS-303A Splitter Type Fiber Optic Splice Closure

The body of this closure splitter box is made of fiberglass and PP as customer\'s request that has extremly high tensile strength, waterproof and dustproof protection function, reaching IP68. This joint fiber optic splitter closure box can be equipped with 1*16 Mini splitter& 1*1

Hangzhou Tuolima Network Technologies Co., Ltd      [2023-04-14 17:22:12 ]

TGJS-104 Inline Type Fiber Optic Splice Closure

TGJS-104 is one of the main equipment for user access points, applied for protective connection and distribution between two or more cables. The primary function is to connect distribution cable and indoor cable in the open air. The fiber splice enclosure is widely used in commun

Hangzhou Tuolima Network Technologies Co., Ltd      [2023-04-14 17:21:32 ]

TGJS-101 Inline Type Fiber Optic Splice Closure

TGJS-101 inline fiber optic splitter closure is one of the main equipment for user access points, applied for protective connection and distribution between two or more cables. The primary function of horizontal fiber optic splice enclosure is to connect distribution cable and in

Hangzhou Tuolima Network Technologies Co., Ltd      [2023-04-14 17:20:44 ]

TFX-05 8 Core Fiber Optic Distribution Box

Model TFX-05 is a box that splits an optical cable into a single optical fiber. It is installed on the wall for user termination. Its function is to provide optical fiber fusion and pigtail fusion. This optical fiber cable distribution box also provides mechanical protection and

Hangzhou Tuolima Network Technologies Co., Ltd      [2023-04-14 17:20:06 ]

R4 Turn 360 ° Rotating Tile Displays

Professional compact push-pull displays, small structure is equipped with 6 double-sided pull-out display boards, 360° rotating display board can provide the best display angle for ceramic tiles. R4 Turn 360 ° Rotating Tile Displays R4 Turn 360 ° Rotating Tile Displays R4 Turn

Foshan EXE.Display Equipment Co.,Ltd      [2023-04-14 16:41:47 ]

noids 5CLADB 5FADB ADBB JWH018 ADB-FUBINACA AMB-FUBINACA

我们 有各种各样的产品,如果您有兴趣,请联系我 whatsapp +8618131102589 Wickr alicehbzgchem admin@hbzgchem com 三马ID:HY7DKCBW

Hebei Zhenguang New Material Technology Co., Ltd.      [2023-04-14 16:21:45 ]

Universal Tensile Strength Tester (Dual Column) QS-C01-1

Universal Tensile Strength Tester (Dual Column) QS-C01-1 This Universal Tensile Strength Tester is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line, fabric, paper, avia

Qinsuns Instruments Co., Ltd      [2023-04-14 16:11:36 ]

Tobee® Bearing Housing C004M for 3x2C and 4x3C AH Slurry Pumps

C004M Bearing Housing Slurry Pump Bearing Housing basic part number is 004, it is container of bearings and shaft. There are four clamp bolts through the base which fasten the slurry pump bearing housing. Slurry pump bearing housings are normally made in grey iron material, ducti

Hebei Tobee pump      [2023-04-14 15:36:19 ]

Tobee® F062-10-C23 Labyrinth for 10x8F-AH Slurry Pump

Labyrinth F062-10-C23 Tobee ® Slurry Pump Labyrinth F062-10-C23 Slurry pump labyrinth Slurry Pump Labyrinth Part B062, C062, D062, DD062XL, E062, EE062 Our slurry pump labyrinth can be used for AH series Slurry Pumps, L series Slurry Pumps, M series Slurry Pumps, H series Slurry

Hebei Tobee pump      [2023-04-14 15:34:35 ]

Tobee® G8013D21 Cover Plate for 10x8 G-AH Slurry Pump Spares

G8013D21 Cover Plate Slurry Pump Cover Plate Tobee ® 10x8 G-AH Heavy Duty Pumping Applications The 10/8 G-AH pump range is designed to other industrial applications. Ball mill discharge, Bottom/fly ash, Lime grinding, Coal, Coarse sand, Coarse tailings, Dredging, FGD, Fine taili

Hebei Tobee pump      [2023-04-14 15:31:37 ]

Tobee® 10/8 GAH Slurry Pump Frame Plate G8032HSPRTSD21

Pump Parts Frame Plate G8032HSPRTSD21 Tobee ® Slurry Pump Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Generally, the material of slurry pump cover plate less than 6/4 size is ma

Hebei Tobee pump      [2023-04-14 15:29:12 ]

Tobee® 1.5/1B-AHR Slurry pump rubber expeller ring B029R55

Tobee® Slurry Pump Expeller Ring B029MR55 it designed by spatial structure CFD and impeller casting CAE, Precision casting and professional heat treatment process make the parts up-to more higher hardness, Precision machining and painting technology ensure the parts are more con

Hebei Tobee pump      [2023-04-14 15:20:17 ]

Tobee® 10/8ST-AH Slurry Pump Impeller Release Collar FAM239M

Tobee ® Providing Slurry Pump Impeller Release Collar is called “Impeller Disassembly Deice”as well, it is located between the shaft sleeve and labyrinth. to be removed the big impeller in large pumps easily. FAM239M, S239M, T239M Tobee ® offers AH Series Slurry Pumps √ B

Hebei Tobee pump      [2023-04-14 15:17:34 ]

Tobee® 4/3C-AHR Slurry pump wear bushing C075C23

C075C21 Short Shaft Sleeve The Shaft Sleeve Slurry Pump Shaft Sleeve is also a quick - wear part of slurry pumps. The design and material of shaft sleeve is significant to slurry pump service life, The slurry pump shaft sleeve protects pump shaft from abrasion and corrosion withi

Hebei Tobee pump      [2023-04-14 15:11:35 ]

Tobee® D118-9P03 Lantern Restrictor Compatible with 3/2DD-HH Slurry Pump

Tobee 3x2 HH Slurry Pump Lantern Restrictor D118-P03 is compatible with 3/2DD-HH Horizontal High Head Slurry Pump Lantern Restrictor. Slurry pump lantern restrictor is one of shaft seal parts in full flow gland seal slurry pump where the flushing water is injected through. 118 La

Hebei Tobee pump      [2023-04-14 15:09:27 ]

Tobee® EAM076C21 Wear Bushing for 10x8 EM Slurry Pump

EAM076C21 EAM076C23 Wear Bushing Shaft Sleeve Specifications Materials 3Cr13, 4Cr13, Stainless steel, Ceramic etc Part code 075, 076 Replaced model Tobee TH(R), THH, TL(R), TG(H), TP(R), TF. Warman AH(R), HH, L(R), G(H), SP(R), AF etc Shaft Sleeves B075, C075, D075, E075, F075, F

Hebei Tobee pump      [2023-04-14 15:04:46 ]

875/65R29 Tires

875 65r29 Tires All Popular Tire Size 20.5 R25 18.00 R25 (525/95R25) 21.00 R33 14.00 R24 33.00 R51 12.5/80-18 24.00 R35 445/95R25 27.00 R49 29.5 R29 17.5 R25 19.5L-24 17.5L-24 16.00 R24 30.00 R51 29.5 R25 21.00 R35 16/70-20 35/65R33 850/65R25 40.00 R57 23.5-25 12.00 R20 16.9-28 1

Duratech Industrial Group Limited.      [2023-04-14 14:56:14 ]