Searching alpha:[0* TO 9*] , total 533391 products,queries done in 208 ms

8E1 to Ethernet GFP Converter

Overview The 8E1 to ethernet converter  is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 ?8 E1 lines. The maximum bit rate is 15.8Mbps (8E1 lines). The 8E1 converter not only provides alarms and status of the E1 line but also ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 14:05:34 ]

4 E1 to Ethernet GFP Converter

Overview The 8E1 to ethernet converter  is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 ?8 E1 lines. The maximum bit rate is 15.8Mbps (8E1 lines). The 8E1 converter not only provides alarms and status of the E1 line but also ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 14:04:40 ]

4U Rack Mount Chassis

Description: The 4U/16port rack(BD-CH04) can support for 16 interface fiber card. every card could work independently and different types of interface converter card can be inserted in one rack;the system power supply is separated from interface converter by communication ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 14:03:29 ]

E1 G.703 to 31 channel RS232 converter

E1 G.703 to 31channel RS232 converter,31 channel RS232 over E1 G.703 converter PRODUCT CHARACTERISTIC RS232 rate support 0~115200Kbps self-adapt; Support RS232 interface (TXD,RXD,GND) RS232 support hot-plug, connection to DTE or TCE device; PRODUCT CHARACTERISTIC RS232 rate ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 14:02:43 ]

E1 G.703 to 8 channel RS232 converter

E1 G.703 to 8channel RS232 converter ,8 channel RS232 over E1 G.703 converter CHARACTERISTIC RS232 rate support 0~115200Kbps self-adapt; Support  RS232 interface (TXD,RXD,GND) RS232 support hot-plug, connection to DTE or TCE device; offer 2 kinds of loop-return function, ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 14:00:47 ]

E1 to Ethernet and RS232 converter

E1 to Ethernet and RS232 converter  could Plugging directly into the 10/100Base-T port of a hub or LAN switch, the E1 to Ethernet  converter provides FE1 access at connection data rates of 2.048 Mbps, or  nx64 (n=1 to 32 channels). The E1 to Ethernet and RS232 converter ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 14:00:01 ]

16E1 to Gigabit Ethernet Converter with optical SFP slot

Functions: .16E1-10/100/1000M Gigabit Ethernet interface converter used back multiplexing technology, transfer 10/100/1000M Ethernet data by using multi E1 channels. Realize convert between 1 to 16E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:59:10 ]

Framed E1 G.704 to RS232 converter

Overview BD-S2228/S2228F/S2228PoE is a modularized hi-performance workgroup-level or enterprise-scale switch, with 24 Fast Ethernet ports(24 100M SFP slots for S2228F),plus maximum 4 gigabit ports. BD-S2228/S2228F/S2228PoE can connect all (Fast) Ethernet devices so that your ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:58:26 ]

2 Ethernet over 2E1 Convergency converter

Overview BD-2E1-2ETH-CON is multiservice node ring network system equipment is the highly integrated access devices with the bandwidth share function. The 2E1 device can realize two RS-232/485 and 2 Ethernet over 2 channel E1 aggregation transmission. The Ethernet interfaces in ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:57:39 ]

E1 G.703 to V.35 and 10/100BaseT Ethernet converter

PRODUCT CHARACTERISTIC  realizes long-distance monitoring of this end equipment to the far-end equipment (two-row indicating lamp, upper row indicating local status, lower row indicating far-end status);  based on self-copyright IC; overall rate of V.35 and Ethernet is 1984K, ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:56:49 ]

10/100Base-T Ethernet to V.35 converter

Decription: BD-ETH-V.35 provides conversion from V.35 to Ethernet, is a good performance, self-study long-distance Ethernet bridge. It is of small volume and low cost and is very suitable for connection application which needs low cost equipment. It can be also used as an ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:50:52 ]

16E1 to Ethernet Converter

Functions Baudcom’s 16E1/Ethernet converter realize Ethernet transparent transmission over 1~16E1 with maximum transmit rate of 31.68Mb/s. The converter adopts with international standard protocol (G.7041、G.7042、G.7043、G.8040) at all layers and able to intercommunicate ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:50:00 ]

8E1 to Ethernet Converter

Overview:        The 8E1 to ethernet converter (also called ethernet over 8E1 converter) uses reverse multiplexing technology to transmit 10/100BaseT data with bonding multi E1 channels,realizing conversion between 1-8 E1 channels and Ethernet interface. It can ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:47:34 ]

4E1 to Ethernet Converter

Product function:4E1 to 10/100BT ethernet converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 4 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:46:50 ]

E1 to 4*10/100BaseT Ethernet converter with Local management

channel provided by existing networks with low cost. 10/100Base-T(RJ45) interfaces are provided at the end of Ethernet LAN to accomplish various functions including MAC address self-learning, address filtering, address table maintenance and flow control. The E1/4*10/100BASE-TX ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:45:54 ]

E1 to 4V35 Converter

E1-2/4V35 provides physical conversion between ITU-T G.703 standard E1 interface and 2/4 standard V.35 interfaces as well as one RS232 data channel. It can provide safe and seamless communication connection between equipments with different interfaces in the network. Random time ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:45:05 ]

10/100Base-T Ethernet to V.35 converter

Decription: BD-ETH-V.35 provides conversion from V.35 to Ethernet, is a good performance, self-study long-distance Ethernet bridge. It is of small volume and low cost and is very suitable for connection application which needs low cost equipment. It can be also used as an ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:44:16 ]

G.703 E1 to RS232 converter

Features: RS232 rate support 0~115200Kbps self-adapt; Support  RS232 interface (TXD,RXD,GND) RS232 support hot-plug, connection to DTE or TCE device; offer 2 kinds of loop-return function, namely E1 self-looping at local end (ANA) and RS232 self-looping at local end (REM) ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:43:15 ]

Framed E1 to V.35 converter

Overview     The framed E1 to V35 converter provides conversion between ITU-T G.703 standard E1 interface and V.35 port.The V.35 converter realize V.35 over E1 conversion and provides safely seamless connection of communication between different devices with ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:42:16 ]

E1 to V.35 Protocol Converter

Overview: E1 to V.35/V.24 (provides conversion between E1 and V.35/V.24 interface)  Product introduction:E1 to V.35/V.24 converter provides physical level conversion between ITU-T G.703 standard E1 interface and standard V.35 interface, it can receive synchronous 2.048 Mbps ...

Shanghai Baudcom Communication Device Co.,Ltd    [Electrical Equipment & Supplies]   [Electrical Product Agents]   [2018-09-12 13:41:08 ]