Our company\'s clean room doors include metal door (aluminum frame plus PCGI door), steel door (steel frame PCGI door) and HPL door (HPL sandwich panel and aluminum or steel frame). According to the switch mode of the door, it can be divided into pull/push door and sliding door.
Suzhou Wonzone Construction CO.,LTD [2020-04-30 11:01:34 ]
Glass f used t o s teel tank is made up of glass fused steel with special sealant & self locking bolts, which are designed for optimum energy efficiency, durability and long lasting performance. They are commonly called “ Glass-Fused-to-Steel ” tank, also “ Glass-Fused-to-S
Center Enamel Co., Ltd [2020-04-30 10:25:57 ]
Glass Fused to Steel l eachate storage tanks are installed at m unicipal w astewater plant to collect the leachate water runoff for treatment. These leachate storage tanks prevent contaminated water from seeping into the ground water prior to treatment. There are only few tanks t
Center Enamel Co., Ltd [2020-04-30 10:24:36 ]
Glass Fused to Steel Bolted Waste Water Storage Tanks are the leader of Water Storage Solutions, which is widely used as Waste Water Storage Tanks for Biogas Plant, Waste Water Treat Plant (WWTP) etc. With the advantage of both GLASS and STEEL, Glass Fused to Steel Bolted Waste W
Center Enamel Co., Ltd [2020-04-30 10:23:11 ]
Center Enamel company is the leading manufacturer of Glass Fused to Steel Bolted Fire Water Storage Tank s in China, we develop and produce it since 1989. Our Glass Fused to Steel Bolted Fire Water Storage Tank design meet or exceed to AWWA D103-09,OSHA,NFPA and EN ISO28765 inter
Center Enamel Co., Ltd [2020-04-30 10:21:53 ]
Leachate Storage Tanks are designed to store leachate, which is the water is being extracted from the site. Leachate is highly corrosive depending on the variability of the composition, and need tanks and containers with excellent corrosion resistance to store it. When the compos
Center Enamel Co., Ltd [2020-04-30 10:20:17 ]
There are many kinds of storage tanks such as Concrete Tank,Carbon Steel Tank, FRP Tank etc. However, more and more customers prefer to choose porcelain enamel Tanks as their first solution for potable water and drinking water storage. Porcelain enamel tank is also known as Glass
Center Enamel Co., Ltd [2020-04-30 10:18:34 ]
Center Enamel provide bolted steel tanks design and manufacturing for customer all over the world. Bolted steel tanks are made from individual sections including steel plate, valves, doors or manhole covers and roofs. All the individual sections are manufactured and finished offs
Center Enamel Co., Ltd [2020-04-30 10:15:39 ]
Our bolted steel tanks are made from high-quality Glass-Fused-to-Steel panels. All the Glass-Fused-to-Steel panels and tanks accessories are manufactured in a factory and are bolted together at the desired location. Bolted storage tanks can be used for 200000 Gallon fire protecti
Center Enamel Co., Ltd [2020-04-30 10:14:16 ]
Description GAB02 gas amplifier is suitable for the working environment that needs to increase the pressure of the original air compressor system. It can increase the pressure of the workshop air supply system. It only needs to use the compressed air in the working system as the
JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. [2020-04-29 14:58:00 ]
This series of pump uses single pneumatic non-equilibrium gas distributing valves to move to and fro automatically. The drive parts of the pump are made of aluminum alloy or stainless steel. The full set of sealing parts is imported. The maximum drive pressure is 10bar. We sugges
JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. [2020-04-29 14:56:41 ]
M-Series air driven liquid pump uses a built-in pneumatic control four-way two-position valve to move to and fro automatically. This series of product is produced by introducing related technology abroad and designing according to the standards of our country. The air driven part
JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. [2020-04-29 14:55:25 ]
ODMT MPGC series pressure gauge calibration table is applicable for testing spring tubes (C-type tube, coil spring tube, spiral tube), etc. The calibration pressure of pneumatic calibration table is up to 15Mpa and that of hydraulic calibration table is up to 250Mpa. (Customers c
JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. [2020-04-29 14:54:08 ]
Description Reference Standards TSGZF001-2006, GB-T12242-2005, GB-T12241-2005, GB-T12243-2005 Range of application applicable for the set-pressure, setback pressure and sealing tests of direst loaded and pilot-operated safety valves. Technical Parameters •Maximum drift diameter
JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. [2020-04-29 14:52:40 ]
Basic information of Double Orifice Air Release Valve This valve is a pipeline will be matched equipment, apply to the temperature does not exceed 100 ℃ water, hot water pipe on the pipe from the air. Features of Double Orifice Air Release Valve 1. Body is provided with a shock
ZECO VALVE GROUP CO., LTD. [2020-04-28 11:36:24 ]
UV Curing machine UVC-502 series is equipped with 2 groups of quality metal halid lamps which is suitable for conformal coatng material curing. ● 2 groups of metal halid lamps ● Teflon mesh belt conveyor with offline mode UVC-502 ● Stainless steel pin chain conveyor with in
1 Click Smt-Reflow Oven [2020-04-27 19:23:22 ]
FREE-VALVE ’s Stainless Steel API Flanged Basket Strainer is mainly composed of pipe, the filter element, flange, cover, etc, its are installed on the pipe to filter out the solid impurities in the fluid, and clean fluid is discharged from the strainer outlet through the filter
Zhengzhou Free Fluid Control Technology Co.,Ltd [2020-04-27 17:20:05 ]
FREE-VALVE’s fluorine lining tank bottom angle valves are designed for the convenient and fast discharging the material or samples from the bottom of the reactor,drain or feed vessel .The valve can be welded or installed on the vessel through the flange at the bottom of the val
Zhengzhou Free Fluid Control Technology Co.,Ltd [2020-04-27 17:14:27 ]
FREE-VALVE’s insulation type tank bottom angle valves adopts jacket insulation design, and it are designed for the convenient and fast discharging the material or samples from the bottom of the reactor,drain or feed vessel .The valve can be welded or installed on the vessel thr
Zhengzhou Free Fluid Control Technology Co.,Ltd [2020-04-27 17:08:33 ]
Our bolted steel tanks are made from high-quality Glass-Fused-to-Steel panels. All the Glass-Fused-to-Steel panels and tanks accessories are manufactured in a factory and are bolted together at the desired location. Bolted storage tanks can be used for 200000 G allon fire protect
Center Enamel Co., Ltd [2020-04-27 13:59:30 ]
