SDIMF200 ash & volatile matter tester can be used to determine ash and volatile content in coal, coke and other solid biomass fuels etc.1.Intelligent design, testing process is controllable ①Equipped with electronic lock, which can’t be opened during the testing process. ②A
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:51:18 ]
SDTGA520 can be used to determine the moisture content in coal, coke and other solid biomass fuel;One batch 20 samples Blast heating way and light wave heating way are available. Sundy , founded in 1993,is the leading supplier of coal analysis total solutions in China With 24 yea
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:50:34 ]
SDTGA5000a can be used to determine the moisture, ash and volatile matter as well as calculation of fixed carbon and calorific value in coal, coke, calcined petrol coke and other solid biomass fuel etc.16 samples for moisture & ash, 10 samples for volatile matterFurnace temperatu
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:49:36 ]
SDTGA8000 can be used to determine the moisture, ash and volatile matter as well as calculation of fixed carbon and calorific value in coal, coke, calcined petrol coke and other solid biomass fuel etc The only proximate analyzer which can test batches of sample without waiting fo
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:48:54 ]
SDTGA6000 can be used to determine the moisture, ash and volatile matter as well as calculation of fixed carbon and calorific value in coal, coke, calcined petrol coke and other solid biomass fuel etc.19 samples+1 blank sample for moisture & ash; 26 samples+1 blank sample for vol
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:48:03 ]
SDFCl1000 is applied to determine the fluorine and chlorine content in coal or other combustible material Available to calibrate when decomposing the parameters first batch of samples and not calculated to total analysis time. Not necessary to calibrate each day, calibration be p
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:47:24 ]
SDS-IVa can be used to determine the total sulfur content in combustibles such as coal, coke, petroleum and other solid biomass fuels in the field of power plant, coal mining, cement & steel factory etc Test reliable, cost-effective.
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:46:39 ]
SDS720 can be used to determine the total sulfur content in combustibles such as coal, coke, petroleum and other solid biomass fuels in the field of power plant, coal mining, cement & steel factory etc.21 samples loaded once, high test efficiency With digital flow meter, hygromet
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:44:48 ]
5,000psi W P. – 10,000 psi Test-15,000 psi Minimum Burst Certification/Standards API Spec 16C--ISO 14693 Recommended For Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure. Tube Modified
Jingbo Petroleum Machinery Co.,Ltd. [2018-04-17 10:49:25 ]
RK400-04 Economical Tipping Bucket Rainfall Sensor is a hydrology, meteorological instrument used to measure the nature of rainfall, and it converts the precipitation into a pulse signal output. Designed with insect-proof nets, free blocking nozzle and built-in leveller. The mode
Hunan Rika Electronic Technology Co.,Ltd [2018-04-17 10:46:33 ]
RKL-01 Submersible Liquid Level Transmitter adopts dry ceramic capacitor sensor or temperature-compensating isolating-membrane diffusing silicon pressure sensor as a sensing element supported with the special cable provided with air venting conduit as well as special water–tigh
Hunan Rika Electronic Technology Co.,Ltd [2018-04-17 10:44:33 ]
The Multi-Plate Radiation Shield protects temperature,relative humidity or barometric pressure sensors from error-producing solar radiation and precipitation. This shield relies on a combination of plate geometry, material and natural ventilation to provide effective shielding. T
Hunan Rika Electronic Technology Co.,Ltd [2018-04-17 10:43:18 ]
5,000psi W P. – 10,000 psi Test-15,000 Minimum Burst Certification/Standards API Spec 16D--ISO 14693 Recommended For Blow-out preventer (BOP) systems requiring high pressure, high temperature and flame resistant control lines certified to API 16D. Armored hose assemblies with f
Jingbo Petroleum Machinery Co.,Ltd. [2018-04-17 10:39:49 ]
[ TDK We distribute original TDK products, If you need to buy TDK , please feel free to contact us! We sell TDK full range of products, including Capacitors, Inductors (Coils), EMC Components, RF / SAW Components and Modules, Voltage / Current / Temperature Protection Devices, Se
深圳市傲壹电子有限公司 [2018-04-17 09:58:10 ]
HY-210 can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage. HY-210 is suitable for bonded seal of electronic components, power module and control module, LED invertor potting, et
Hong Ye Silicone Rubber Company [2018-04-17 09:51:19 ]
HY-901 with the advantages of high temperature resistance, abrasion resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. The
Hong Ye Silicone Rubber Company [2018-04-17 09:45:37 ]
S pecification of Non-toxic Food Grade silicone rubber for mask silicone rubber for mask is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1 1 , it is mainly suitable for making mold
Hong Ye Silicone Rubber Company [2018-04-17 09:22:39 ]
Application of Medical Grade liquid silicone rubber fo r toe cap Medical Grade liquid silicone rubber fo r toe cap is a two component high elongation silicone gel designed for silicon e food care products, such as silicone insole. T his product cured at room temperature to a soft
Hong Ye Silicone Rubber Company [2018-04-17 09:12:42 ]
HY-530 is a kind of room temperature vulcanized silicone rubber in condensation type. It ’s generally named as two part silicone rubber , Part A is a flowable liquid, part B is the curing agent or catalyst . It ’ s mainly used for manual model design mold making . HY-530 sili
Hong Ye Silicone Rubber Company [2018-04-17 09:05:55 ]
HY-6 05 is a kind of room temperature vulcanized silicone rubber in condensation type. It ’s generally named as two part silicone rubber , Part A is a flowable liquid, part B is the curing agent or catalyst . It ’ s mainly used for mold making . HY-6 05 silicone rubber is use
Hong Ye Silicone Rubber Company [2018-04-17 08:58:56 ]
