Pumps Manufacturers and Suppliers
Flexible pump connectors are used to absorb pump vibration, noise and eliminate the piping stress on pumps. The misalignment should not exceed 1/8inch. Pump connectors are made of an annular corrugated stainless steel hose with woven wire braid of high tensile stainless steel wir
HengShui Chengrui Rubber Hose Co., Ltd. [2014-04-10 05:29:20 ]
Flexible connectors are manufactured with deep corrugations to increase flexibility and smaller bend radius. They are often applied to absorb vibrations, eliminate thermal expansion, dampen noise and compensate pipe misalignment. Flexible connectors for pumps have three different
HengShui Chengrui Rubber Hose Co., Ltd. [2014-04-10 05:27:56 ]
Helically corrugated metal hose features extreme flexibility as well as maintain high working pressure. It is specially designed for the applications where has strict requirement of bending radius. In contrast with annular construction, spiral construction reduces turbulence dama
HengShui Chengrui Rubber Hose Co., Ltd. [2014-04-10 05:24:18 ]
Double-plied helically corrugated hose provides premium operating stability as a result of double-plied construction in the flanks and triple-wall construction at the crest. The hose is resistance welded at the crest and cold formed. Although double-wall construction, it still ma
HengShui Chengrui Rubber Hose Co., Ltd. [2014-04-10 05:20:58 ]
Superflex annular corrugated hose , similar to medium pressure hydro-formed hose, has more corrugations per inch to provide prominent flexibility. For 1/4" bore size, the static bend radius can reach 0.9inch. This makes a solution for tight routine and compact structure. Super fl
HengShui Chengrui Rubber Hose Co., Ltd. [2014-04-10 05:20:06 ]
Low pressure stainless steel braided corrugated hose is designed to stay and bend in a certain position providing a stress-free connection between piping systems. To some extent, it can absorb part of vibration and noise created by the equipment. Unbraid or single braid is availa
HengShui Chengrui Rubber Hose Co., Ltd. [2014-04-10 05:18:34 ]
Hydro-formed annular corrugated flexible hose provides minimal residual stress, uniform wall thickness and minimal work hardening. It favors long-lasting service life and flexibility. T316 annular corrugated hose with single or double stainless steel braids is suitable for medium
HengShui Chengrui Rubber Hose Co., Ltd. [2014-04-10 05:17:56 ]
Heavy-wall annular corrugated metal hose not only provides high working pressure but also enhances performance in resisting turbulence damage. Hose diameters ranging from 1/4" to 6" are manufactured. Un-braided, single and double are available. It is often used as pump connectors
HengShui Chengrui Rubber Hose Co., Ltd. [2014-04-10 05:17:23 ]
Heavy-walled corrugated metal hose is manufactured for extremely high pressure applications. Stainless steel wire braid from unbraid to quad, protects the corrugated hose and support working pressure. Heavy wall construction, on one hand, reduces resonance damage and carries medi
HengShui Chengrui Rubber Hose Co., Ltd. [2014-04-10 05:02:32 ]
Stainless steel sintered metal mesh filter are several multilayer woven or perforated stainless steel wire mesh overlapped together, and then sintered in the vacuum sintering furnace. We can roll the sintered filer into tube shape and welding the seam forming sintered tube filer.
CKH Sintered Metal Filters Co,.Ltd. [2014-03-27 04:36:11 ]
Our Sintered Wire Mesh Laminates made of perforated metal (perforated metal as support layer make the sintered filter easy backwash), stainless steel square wire mesh and plain dutch sintered wire cloth are the fine materials for filtration, usually 5 - 7 layers. Sintered mesh la
CKH Sintered Metal Filters Co,.Ltd. [2014-03-27 04:35:19 ]
It is well used in oil wells, where fine particles need to be filtered under extremely high pressure conditions. 5 layers of perforated sintered mesh Perforated metal sinter wire mesh 5 layers Perforated sintered wire mesh plate is made from several layers of stainless steel wove
CKH Sintered Metal Filters Co,.Ltd. [2014-03-27 04:32:44 ]
Plain weave sintered square woven wire mesh is made by sintering multiple layers of plain weave square woven mesh together, and its cross section structure as below picture. Because of the large open area percentages of the square woven wire mesh layers, this type of sintered wir
CKH Sintered Metal Filters Co,.Ltd. [2014-03-27 04:30:54 ]
Sintered wire mesh is made form multiple layers of woven wire mesh panel together using a sintering process. This process combines heat and pressure to permanently bond multi-layers of mesh together. The same physical process used to fuse individual wires together within a layer
CKH Sintered Metal Filters Co,.Ltd. [2014-03-27 04:30:14 ]
High pressure 250 CB Steam hose in red cover High pressure 250 CB Steam hose in red coverStructure The tube of steam hose is Chlorobutyl synthetic rubber. And the cover is red or black synthetic rubber, the reinforcement is braided steel wire (3/4’’ and higher, it have two st
Zhengyu Steam Hose Factory [2014-03-12 10:14:28 ]
Our factory has rich experience in manufacturing varies of steam hose, such as single wire braid steam hose, double wire braids steam hose etc. It is used for the conveyance of 165 °C ~ 220 °C saturated steam or superheated water. It finds applications in steam cleaning, steam
Zhengyu Steam Hose Factory [2014-03-12 10:09:47 ]
Brief introduction of steam hose Steam hose is manufactured by special rubber with good heat resistance and copper wire braid reinforced layer. It is suitable for continuous conveying saturated steam and superheated steam below the temperature of 150°C or intermittent conveying
Zhengyu Steam Hose Factory [2014-03-12 10:06:33 ]
In addition to regular wire fan finger guard and dome type fan guard grill, we also supply special shape safety fan guards with various styles and specifications. Materials Stainless steel wire or low-carbon steel. Surface treatment Galvanized, powder coating and polished. Featur
Henglinda fan guard Co., Ltd. [2014-02-18 04:47:25 ]
Metal fan finger guard is made from top quality raw material - low carbon steel or stainless steel - using modern technology in conformity with the international standards. It is used to keep electronics and appliances from overheating, and to keep the cooling fan in excellent co
Henglinda fan guard Co., Ltd. [2014-02-18 04:46:35 ]
Model No. BJHC037 OEM Acceptable Packing wooden case or according to your requirements Delivery time within 7-28 days after your decision of requirements and advance payment Details Model No. Cat No. Suitable line Sheave dia*sheave width(mm) Rated Load(kn) Weight(kg) Aluminum She
河北五洲电力器材厂 [2013-12-09 03:39:23 ]
