Control number seal arrow
Style Oil Style Oil Single lip Spring loaded design most popularity used for fluid retention
Style Oil Style Oil T Type General purpose, non pressure fluid & severe grease sealing with light exclusion of foreign materials. ( Max. pressure 0.3 kg/cm ) Lip A combination of spring fitted seal lip and dust lip. If grease is applied between the sealing lip and dust lip, it ca
Polypropylene fixed length seal with welded insert Length = 190mm Width = 9mm Integrated breakpoint for ease of removal Sequentially numbered & embossed with company name
DUPLEX BRAIDED to improve thermal conductivity DUPLEX BRAIDED to improve thermal conductivity and lubricity for maintaining extremely low co-efficient of thermal expansion. A very high quality compression packing best suited for valve stems, centrifugal pumps, wood pulp, caustics
Casted steel composition WCCrMO-M3 Casted steel composition WCCrMO-M1- Hardness 65 Hrc/min- Tensile strength 63.275 Cm x 3- Flatness 11 Band max
The Aero 3 metal bellows seal is designed for high pressure and temperature applications AERO 3 The Aero 3 metal bellows seal is designed for high pressure and temperature applications. The Aero 3-0 utilises an `O' Ring for its secondary sealing APPLICATION Petrochemical, hydroca
Style Oil Style Oil Oil Seals (Teflon Products)
This is the commonest seal range for various rotating equipments - because of its simple construction employing secondary seal
SFTS-1-8-F Sealant Tape Used to seal all splices of Protectowire Linear Heat Detector against moisture.
Material PVC Material PVC Magnetic Seal, Glass to Glass at 135o Available for glass thickness 6mm, (1/4"), 8mm (5/16") , 10mm (3/8") and 12mm (1/2 Made of PVC material with pressed in magnetic powder With Soft Vinyl in the profile providing more clamping force onto glass Stocked
H06C IMAGE UNAVAILABLE VALVE STEM SEAL 8.5 15.8 15 VS05030
Ferolite IT 300 Steel 5. IGNITION LOSS IS 2712/1998 % 4. RECOVERY IS 2712/1998 % >40 3. COMPRESSIBILITY IS 2712/1998 % 6 14 2. TENSILE STRENGTH IS 2712/1998 Mpa >24 1. DENSITY IS 2712/1998 g /cm3 1.80 - 2.10 The following Information Applies to material Thickness 1.5mm. 0.80 mm t
Padlock Seals with Tail Padlock Seals with Tail Polypropylene padlock seal with strap made of the same material. Resistant against atmospheric, chemical agents and sunlight exposure.
