LS108H is able to simultaneously measure and display UV, Visible and Infrared transmission values. This meter is self-contained light sources and self -calibration. No adjustment is needed. The users only need plug the power supply, turn on the switch and put the sample in the te
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 11:52:29 ]
LS108 D is used for testing the transmission value of the mobile phone lens, including IR transmission value at wavelength 940nm and 850nm, VL transmission value at wavelength 550nm. Parameter 1. Size 200mm*180mm*106mm(L*W*H ） 2. Size of Testing sample > ￠ 0.5 mm 3. Weight ab
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 11:40:48 ]
LS108A is used for testing the transmission value of the mobile phone lens, including IR transmission value at wavelength 940nm and 850nm, VL transmission value at wavelength 550nm. Parameter 1. Size 200mm*180mm*106mm(L*W*H) 2. Size of Testing sample >Diameter 1.0mm 3. Weight abo
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 11:38:06 ]
LS110A split transmission meter has three independent testing units to measure the transmittance value of ultraviolet light, infrared light, and visible light. It is used for the transmittance testing of glass, plated film, organic materials, solar film and other translucent mate
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 11:32:07 ]
Feature 1.IR transmission meter, IR power meter, two function in ONE device 2.Evaluating heat-insulating property of the tint of windows, solar films, glass and other transparent materials 3.measuring optical power density of infrared ray, wavelength response (1000nm～1700nm), g
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 17:43:17 ]
The LS122A is a wide range spectral wavelength power meter. It can be used for measuring the optical power density of infrared ray. It uses optical sensors to take measurements and displays measure result in W/m2. It is used for l a) Evaluating heat-insulating property of the ti
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 17:35:51 ]
The LS123A Power meter is a wide range spectral wavelength power meter. It can be used for measuring the optical power density of UV light. It is used for a) Evaluating UV Rejection property of the tint of windows, solar films, glass and other transparent materials ; b) M easurin
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 17:28:03 ]
LS182 Solar Film Transmission Meter is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. The users only need plug the power suppl
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 17:05:25 ]
LS181 Solar Film Transmission Meter is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. The users only need plug the power suppl
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 16:40:28 ]
LS101 Solar Film Transmission Meter is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. The users only need plug the power suppl
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 16:29:17 ]
LS160 Solar Film Transmission Meter is a small size, portable product for transmission value measurement. It is able to simultaneously measure and display UV, Visible and Infrared transmission values. Parameter 1. Size 93mm *52mm *25mm(L*W*H) 2. Weigh 65g (exclude batteries) 3. T
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 11:44:43 ]
LS183 is able to simultaneously measure and display UV, Visible and Infrared transmission values. This meter is self-contained light sources and self-calibration. No adjustment is needed. The users only need plug the power supply, turn on the switch and put the sample in the open
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 11:37:33 ]
Windows are optical glass with ground and polished faces that are relatively parallel. They are used to isolate two physical environments while allowing light to pass. When selecting windows, you should consider the following material, transmission, scattering, wave front distort
VY Optics Photoelectric Technology Co., Ltd. [2015-08-13 14:55:04 ]
Spherical Ball Lenses are commonly used for laser collimating and focusing, laser-to-fiber coupling, fiber-to-fiber coupling, and fiber-to-detector coupling. Larger spheres are easier to handle and ease the sensitivity of translational alignment. However, smaller spheres has the
VY Optics Photoelectric Technology Co., Ltd. [2015-08-13 14:26:37 ]
Cylindrical lens is used to correct astigmatism in the eye, and, in rangefinders, to produce astigmatism, stretching a point of light into a line They are available in either plano concave or plano convex configurations. Plano-Concave Cylindrical lenses have a negative focal leng
VY Optics Photoelectric Technology Co., Ltd. [2015-08-13 11:23:13 ]
Product Specification/Models Substrate soda lime float glass Center wavelength 540, ±2nm Bandwidth 10, ±2nm Tpeak >60% Blocking tave <0.01% over 200 to 1,200nm Technology ion assist E-beam evaporation, single plate, hard coating Dimension 12.7 x 6mm (mounted) or customized Othe
上海兆九光电技术有限公司 [2015-07-06 09:46:52 ]
Reflect mirror (Silicon) is one of the most important elements in light transmission system . Silicon is used most as the material of mirror, it s reflectivity achieve 98% and with stable thermal properties. With gold plated and protect on the coating of silicon mirror , the surf
石家庄景航科技有限公司 [2014-10-16 08:10:01 ]
Power supply AC 90-250V，DC 10-30V， Load current DC 200mA,AC 400mA Residual voltage AC 2wire≤10V DC 3/4 wire ≤2.5V Consumption current DC≤15mA,AC≤1.7mA Mode Diffuse reflection Repeat accuracy ≤5% Light source Infrared LED (880nm) Ambient temperature -15...55℃ Shell
Dong Tou Huagan Electric Co.,Ltd [2014-09-21 22:52:58 ]
Power supply AC 90-250V，DC 10-30V， Load current DC 200mA,AC 400mA Residual voltage AC 2wire≤10V DC 3/4 wire ≤2.5V Consumption current DC≤15mA,AC≤1.7mA Mode Diffuse reflection Repeat accuracy ≤5% Light source Infrared LED (880nm) Ambient temperature -15...55℃ Shell
Dong Tou Huagan Electric Co.,Ltd [2014-09-21 22:52:36 ]
A Summary DSHD-0168 Petroleum Products Color Tester is designed according the SH/T 0168-92 Test Method for Color of Petroleum Products. The main function of DSHD-0168 Petroleum Products Color Tester is to determine the color of various lubricating oils and other petroleum product
Zhuhai Dshing Import&Export Co.,ltd [2014-08-19 21:49:28 ]
