The working principle is that the two optical fiber section with the melting of high precision motion gently pushing to make two fused into a high-pressure arc, in order to realize the coupling of optical fiber mode field Mainly used in telecom operators.
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-12-21 19:17:40 ]
Description The pen- type visual fault locator is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. And it is the essential test tool for the FTTH project. This visual fau
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-12-21 19:17:10 ]
Introduction Smoke Box (Smoke Density Chamber) measures optical density of smoke generated from test sample when test sample of certain thickness is exposed to heat source(2.5W/cm2, 25kw/m2 using by E 662 furnace) or fire in a chamber. This equipment is satisfied with standards (
chongqing gold co ltd [2017-12-20 14:44:12 ]
Introduction Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is important to meas
chongqing gold co ltd [2017-12-20 14:29:46 ]
Introduction Cone Calorimeter measures heat release rate(H R.R), smoke release, ignition time, oxygen consumption, carbon monoxide and carbon dioxide generation and mass loss rate when specimen is exposed to resource of conical heater. International standards 1. GBT16172 2. ISO 5
chongqing gold co ltd [2017-12-20 14:06:39 ]
Introduction Curtain Flame Propagation Tester mainly based on NFPA 701.Which regulations fabrics and films flame propagation test method for fabrics, and apply to curtains and drapes, curtains, or other shelter materials windows, awning, tent, waterproof cloth and fabric structur
chongqing gold co ltd [2017-12-20 13:49:20 ]
Introduction polyfoam burning testing instrument UL 94 measures the combustion properties (after flame, after glow) by burner (H-5025 UL tirrill burner) when test sample combusts in chamber\'s internal volume of 0.864 m3and is installed internal light to observe the specimen\'s p
chongqing gold co ltd [2017-12-20 13:46:52 ]
Introduction cable impact and spray flame tester 60331-12 tester is used in test conditions where the basic flame temperature is at least 830ºC and tests the cable exposed to flame and mechanical shock that needs to maintain the circuit integrity. International standards • IEC
chongqing gold co ltd [2017-12-20 11:59:50 ]
Introduction Cable corrosion test apparatus is used to test the acidity of the gas that released during combustion from cable or optical cable components material; The equipment is designed and produced on the basis of GB/T 17650 and IEC 60754.The cable material is processed by p
chongqing gold co ltd [2017-12-20 11:49:30 ]
Introduction Single Burning Items(SBI), as European\'s the evaluation of fire-resistance performance of building materials ,measures heat release rate (H R.R), smoke growth rate index (SPR), oxygen consumption, CO, CO2 production, mass loss rate and so on. International standards
chongqing gold co ltd [2017-12-20 10:57:22 ]
Introduction LOI(Limited Oxygen Index tester) measures minimum oxygen concentration as necessary when specimen combustion. This equipment\'s the oxygen analyser is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. TOI (Temperature Oxy
chongqing gold co ltd [2017-12-20 10:35:09 ]
Thermal shock testing Thermal shock testing exposes products to alternating low and high temperatures to accelerate failures caused by temperature cycles or thermal shocks during normal use. The transition between temperature extremes occurs very rapidly, greater than 15 °C per
EBO TESTING CENTER [2017-12-18 15:34:47 ]
Ingress Protection Test The Ingress Protection Test is aimed at the protection level of the electrical equipment shell for the foreign object invasion Then, I\'ll introduce the test here in detail. The IP Code, International Protection Marking, IEC standard 60529, sometimes inter
EBO TESTING CENTER [2017-12-12 11:21:51 ]
SPD005GAsmd 5 psi Gauge Pressure Sensor This pressure sensor has an amplified analogue output. The sensor is compensated for offset, sensitivity, temperature drift and nonlinearity. The sensor is available in the range from 5 to 100 psi. Other ranges on request. Available in Gaug
ISweek company [2017-12-11 16:42:58 ]
NH3-3E100SE Ammonia Sensor NH3 Sensor Description NH3-3E100SE Ammonia Sensor, 3 Electrode sensor; available in Mini, Classic, 4-Series and 7-Series formats. NH3-3E100SE Ammonia Sensor NH3 Sensor FEATURES • Amperometric 3 electrode sensor cell • Very stable zero reading • Ve
ISweek company [2017-12-11 16:40:52 ]
MICROceL HS Hydrogen Sulfide Sensor (H2S Sensor) Description MICRO 3-electrode hydrogen sulphide sensor MICROceL HS Hydrogen Sulfide Sensor (H2S Sensor) Key Features & Benefits • A robust hydrogen sulfide sensor suitable for portable life safety applications • Extremely small
ISweek company [2017-12-11 16:38:26 ]
ZE08-CH2O Electrochemical CH2O Detection Module Profile ZE08-CH2O is a general-purpose and miniaturization electrochemical formaldehyde detection module. It utilizes electrochemical principle to detect CH2O in air which makes the module with high selectivity and stability. It is
ISweek company [2017-12-11 16:36:27 ]
MB7040 I2CXL-MaxSonar-WR High Performance Ultrasonic Precision Rangefinder MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Product Description Weather Resistant (IP67) Sensors, and Optional Chemical Resistance The industrial outdoor I2CXL-MaxSonar-WR sensors have a robust PVC hou
ISweek company [2017-12-11 16:35:12 ]
MB7066 XL-MaxSonar-WRL1 High Performance Ultrasonic Precision Rangefinder MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Product Description The XL-MaxSonar-WRL1 is our longest range (10m) outdoor sensor. The weather resistant XL-MaxSonar-WR is a rugged ultrasonic sensor componen
ISweek company [2017-12-11 16:33:13 ]
OPC-N3 PM2.5 Particle Sensor * PM1 , PM2.5 and PM10 * Reduced power standby mode * Capability to measure up to 2,000 µ g/m 3 * Onboard temperature and humidity sensor * SPI interface not included, order code 000-0SPI-00 OPC-N3 MEASUREMENT Particle range Spherical equivalent size
ISweek company [2017-12-11 16:19:34 ]
