Feature Adopt hot galvanized steel by CNC pressing, assembly type, avoid welding damage zinc coated, nice appearance, and anticorrosive. There are fix type and movable type, all are with LiYangHaide Machinery Manufacture Co., Ltd-- devoted to development and designing of drying e
LiYangHaide Machinery Manufacture Co., Ltd [2015-07-01 10:29:01 ]
Product feature 1、By vertical vibrating and twisting, the materials skips forward to a certain direction, meanwhile, hot air from the hole plate mixes with materials fully to ensure drying efficiently. 2、Adopt counter flow drying principle for high energy utilization and dryi
LiYangHaide Machinery Manufacture Co., Ltd [2015-07-01 10:28:00 ]
Product feature 1、Horizontal or vertical style, single or multi-structure are available. Multi-structure can improve the heating efficiency. 2、Circulative usage of hot air, which improves the utilization of energy. 3、Adopt Frequency convertible control, drying time and capa
LiYangHaide Machinery Manufacture Co., Ltd [2015-07-01 10:27:47 ]
Product feature 1、Driven by vibrating motor, the machine operates stably. It is convenient for maintenance, with low noise and long service life. 2、 By the action of the hot air, the material is in fluidized shape and contacts with the hot air thoroughly with high heat transf
LiYangHaide Machinery Manufacture Co., Ltd [2015-07-01 10:27:18 ]
Product feature 1、With international advanced swing distribution device for even spreading of material and even moisture content of material. 2、Caterpillar are made of stainless steel punched-plate for no sticking, anti-corrosion and cleaning. 3、The machine is equipped two
LiYangHaide Machinery Manufacture Co., Ltd [2015-07-01 10:27:00 ]
slice machine for semiconductors, crystal, ceramic and magnetic material cuting speed 3-6cm2/min table was the computer control of horizontal and vertical movement, the fixture on the material cut into the required product. http://www fhedm com
Ningbo Fuhao Numerical Control Equipment Co.,Ltd [2015-07-01 10:11:37 ]
Finite element analysis technique was used during production, machine body use high strength casting iron. We also use aging, sandblasting, tempering process to ensure the stability of machine tool accuracy during long-term use. The main basis, machine body, slider, table, column
Ningbo Fuhao Numerical Control Equipment Co.,Ltd [2015-07-01 10:06:31 ]
ZNC-MFD uses mirror machining circuit based on ZNC-M series. It can cut metal with a mirror finish. Use the mosted advanced pulse power supply, automatic adjust system, PLD programming. Equiped with the most advanced mixed power device. Using cyclone separator device to separate
Ningbo Fuhao Numerical Control Equipment Co.,Ltd [2015-07-01 10:06:08 ]
Large taper wire cut edm job is always the trouble for many person, especially the working piece is thick. The following measure is should be taken into consideration during working and programming. 1.Increase the tension of the wire. 2.Using special large diameter molybdenum wir
Ningbo Fuhao Numerical Control Equipment Co.,Ltd [2015-07-01 10:03:27 ]
Inside cutting fluid recycle system, it makes machine body clean during working. Good rigidity, running placidly, strong function, convenient and reliable operation. Suitable to process conductive metal moulds, complex metal parts and templates with high precision. Can cut plane,
Ningbo Fuhao Numerical Control Equipment Co.,Ltd [2015-07-01 10:01:37 ]
EDM drilling machine is one kind of electronic discharge machine. The hole dimension it can cut from 0.3mm to 3mm. The maximum depth to diameter ratio can reach more than 200 1. The processing speed is up to 5-60mm/min, can be directly from the workpiece surface, surface penetrat
Ningbo Fuhao Numerical Control Equipment Co.,Ltd [2015-07-01 10:01:10 ]
This kind of wire cut edm machine are widely used for metal cutting process, it can be used for cutting any conductive material. And our wire cut edm machine are widely used for cutting special sharp, small accuracy parts. This wire cut edm machine use Recycling moly wire running
Ningbo Fuhao Numerical Control Equipment Co.,Ltd [2015-07-01 10:00:31 ]
Multi-cut function is necessary for reaching high surface roughness during wire cut edm machine job, general speaking, the first time cut is fast and for getting the approximate dimensions. The second time cutting is for getting high accuracy, while the third time cutting is for
Ningbo Fuhao Numerical Control Equipment Co.,Ltd [2015-07-01 09:58:37 ]
Qingdao Rising Machinery Science And Technology Co.,Ltd is one of the best China 135 cm dobby air jet loom manufacturers and suppliers with professional factory. If you are checking price or 135 cm dobby air jet loom, 135cm dobby air jet weaving machine cost, please feel free to
Wangtaipu Town Industrial Park, Qingdao City, Shandong Province, China [2015-07-01 09:48:47 ]
Power-off resume function, to avoid the repetitions work. It has wire broken emergency system, machine will pause by itself when wire broken accident happen. Automatic centering function control by software. It can be used for cutting angle, different sharp of top and bottom. It
Ningbo Fuhao Numerical Control Equipment Co.,Ltd [2015-07-01 08:55:17 ]
Model 1320*1.5 Bed Width 1320mm Max shear thickness 1.5mm Max bending thickness;1.5mm Max bending angle 90 Max rolling thickness 1.5mm Min rolling dia 76mm Packing size 1790x590x930mm N W./G W 470/530kgs
青岛平洋国际贸易有限公司 [2015-07-01 08:17:30 ]
Item No 791005 791006 791007 Model OEW560 OEW710 OEW1000 Capacity 1.2 mm 1.2 mm 1.2 mm Throat 560mm/22 ´´ 710mm/28 ´´ 104-mm/40 ´´ Packing size 92× 90 × 24 cm 103× 57 × 142 cm 132× 68 × 179 cm Net weight 66KG 75KG 133KG
青岛平洋国际贸易有限公司 [2015-07-01 08:12:56 ]
Model PY-72 The hole size is from 5mm(dia. ) to 35mm(dia. ) The material thickness is no more than 3.5-4mm Net weight 72kg Gross weight 82kg Packing Size 520*220*860mm
青岛平洋国际贸易有限公司 [2015-07-01 08:09:54 ]
Specification 18"x18GA Box size(L/W/H) 1100*220*230mm Steel board width 450mm Weight(N/G) 44/48KG Bead roller kit includes 1/4", 1/8" and 1/2" bead mandrels 1/16", 1/8" and 1/4" linage mandrels
青岛平洋国际贸易有限公司 [2015-07-01 08:06:58 ]
Hand Shearer Main Technical Specification Model PY-5 PY-6 PY-8 PY-10 PY-12 Specification 5” 6” 8” 10” 12” Blade length 127mm 150mm 200mm 250mm 300mm Plate thickness 5.0mm 5.0mm 5.0mm 5.0mm 5.0mm Plate size 70x5mm 70x5mm 70x5mm 70x5mm 70x5mm Bar dia 11mm 11mm 13mm 13mm 1
青岛平洋国际贸易有限公司 [2015-07-01 08:03:40 ]
