GLD series belt feeder is a newly-designed feeding device for large and highly-efficient mining system This type of feeder is based on K-type reciprocating feeders, using the belt instead of reciprocating structure, changing the sliding friction into rolling friction Therefore, f
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 16:45:04 ]
Production information --The smooth surface of buffer strips reduces damages to the belt; -- The buffer bed effectively prevents the belt from tear by supporting belt and absorbing impact. -- The buffer bed can protect the materials from splashing and leaking caused by uneven for
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 16:42:13 ]
Permanent Magnet Frequency Motor for Ball Mill is suitable for the cement,ceramics,metallurgy and other industries. Compared with the traditional drive system, the permanent magnet direct-drive system gets rid of the reducer,hydraulic coupling. Compared with the original system,
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 16:39:19 ]
Permanent Magnet Frequency Motor for Ball Mill is suitable for the cement,ceramics,metallurgy and other industries. Compared with the traditional drive system, the permanent magnet direct-drive system gets rid of the reducer,hydraulic coupling. Compared with the original system,
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 16:38:34 ]
New-typed snakelike spring coupler possesses the advantages of gear-type coupling and flexible coupling, and is a type of perfect coupling for middle and heavy equipment. 1.Striking resistant, reduce shake and strong ability to adjust changing loads, which can protect equipment b
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 16:35:51 ]
NJZ serial Contract Wedge Backstop is a new kind of low-speed backstop used in belt conveyors, which is directly installed on driving drum shaft or low-speed shaft of gears. The precise bearings are used in the product, which ensure high coaxiality, long service life and powerful
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 16:32:47 ]
KPZ series self-cooling Disc Brake Device is designed for stopping large-scale electromechanical device, especially for downward belt conveyor. Technical Feature 1.Control deceleration in the range of 0.05~0.3m/s2 . 2.Braking safely and reliably under conditions such as abruptly
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 16:17:32 ]
Product Information Hydraulic Soft Start devices can be widely applied to the soft start-up, speed-adjusting and soft braking of belt conveyors, hoisting machinery, construction machinery, military machinery, fans, water pumps and so on; it can significantly improve equipment per
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 15:56:27 ]
Electric brush cleaners are widely applied in coal handling system for coal mine, power plant, steel plant and petrochemical corporation. With spiral or herringbone brush roller, the device can effectively clean up pulleys and belt. The brush roller is driven by motor, making the
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 15:43:36 ]
Secondary cleaner is specially designed for continuous-running belt conveyor with poor working conditions. As the second stage in the multistage cleaning system, it can remove the sticky power completely. The scrapers can be made of two types of material polyurethane and tungsten
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 15:16:04 ]
Primary PU belt cleaner is installed on the surface of discharge pulley, with scraper pressing the belt at certain angle and pressure. As the first stage of multistage cleaning system, the primary polyurethane cleaner can clear away most of the sticky material on the belt, only a
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 15:06:47 ]
Product Information Rubber lagged pulley can effectively improve the operating condition of belt conveyors, protecting the steel pulley from abrasion; with the diamond-pattern or herringbone-pattern rubber lagging, it can increase the surface friction of conveyor, effectively avo
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 14:50:54 ]
Technical Feature 1.High-accuracy and high frequency welded pipe is selected as the shell, which enjoys less diameter run-out and better balance; 2.Stamping parts are used as bearing housing, which are machined by NC lathe; 3.The bearings are KA serial special bearing for idlers
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 13:47:37 ]
The belt conveyor is a general-purpose serial product, which uses cotton canvas, nylon, polyester canvas and steel wire belt as towing parts. Belt conveyor mainly consists of following parts transportation belt, drive device, pulley, idler, take-up device, machine frame, hopper,
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-22 11:23:05 ]
Biomass Pulverizer china ***Description of biomass pulverizer China Welcome to buy biomass pulverizer from Jingerui Machinery,which is one of the best biomass pulverizer,rabbit feed pellet machines ,rice husk press machine manufacturers and suppliers in china. ***Introduction of
shandong jingerui machinery co.ltd [2016-08-20 14:55:08 ]
Product Adventure 1.According to different working conditions, the tension can be set ,and then the device can keep the system in a state of constant tension; 2.The device is of quick response and good dynamic, which can make up for plastic deformation of belts or steel wires; 3.
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-19 14:45:49 ]
Product information Conveyor Rain Cover is mainly applied for protecting conveyor belt from rain, dust and wind, reducing losses during transportation process and ensure much more safe and reliable operation and having a great effect upon environmental protection. Features of our
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-19 14:36:35 ]
Product information l. The impact bed is mainly made up of impact bars, reinforced channel steel,supporting frame ,joints and so on. The impact bars are made of rubber bars and Ultra High Molecular Weight PU with special vulcanization technology. The rubber bars are made of rubbe
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-19 14:09:20 ]
Permanent Magnet Frequency Motor is suitable for the cement,ceramics,metallurgy and other industries. Compared with the traditional drive system, the permanent magnet direct-drive system gets rid of the reducer,hydraulic coupling. Compared with the original system, it has the cha
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-19 14:00:57 ]
Technical Feature 1.Our coupling has the characteristic of anti-impact,shock-absorbing and mostly it also adapt to large variety of Loading capacity,which can protect equipment better. 2.Quick dismounting and installation are the advantages for our coupling and the experimental d
LIBO Heavy Inductries Science&Technology Co., Ltd [2016-08-19 13:56:51 ]
