brine tanks for water softener

1. Ranging from 15 liters to 2000 liters, meeting your needs. 2. Made by rotation mould, tanks are good-looking. 3. Save 50% freight cost. Conic body make it possible to pack tanks in same size to the height of container, saving your freight cost. 4 . Easy to put salt in and save

Canature HuaYu Environmental Products Co.,Ltd      [2018-06-30 10:32:20 ]

PE liner FRP tanks for water softener

S pecification 1.S ize 0613-7294 2.Maxmium working pressure 1.0MPa(150PSI) 3.Material FRP and PE 4. Working Temperature 1- 49 Centigrade 5. Maximum v acuum 127mmHg(5\"Hg). 6. Certificates CE ;NSF ; ISO9001 etc. 7. Warranty 3 years 8. Application All feed water and waste water

Canature HuaYu Environmental Products Co.,Ltd      [2018-06-29 09:42:22 ]

Magnesium/ladle/electric arc furnace /rotary kiln/converter Magnesia Gunning Mix

The main raw material for converters and ladle spray coatings is magnesia. The material can have a good combination with the body at high temperature, has the characteristics of erosion resistance, erosion resistance and the like, and can significantly prolong the service life of

TANGSHAN YINMING REFRACTORY MATERIALS CO., LTD      [2018-06-15 16:01:50 ]

Wear-Resisting pouring/corundum/high alumina/refractory/light-weight Castable

these products are widely used in power station,boiler,furnace,heating furnace,pit furnace,heat treament furnace and induction furnace and other different parts of line Tangshan Yinming refractory materials Co., Ltd. was founded in 1992, mainly the production of metallurgy, build

TANGSHAN YINMING REFRACTORY MATERIALS CO., LTD      [2018-06-15 16:01:17 ]

amorphous/graphite A ball/carbon raiser/Coal Low Sulfur Carburant

The morphology, chemistry and crystallinity of recarburisershave a major impact on the overall casting cost. The combined application and cost benefits, which are derived through the use of Desulco, enable foundries to manufacture castings in a highly cost effective manner it red

TANGSHAN YINMING REFRACTORY MATERIALS CO., LTD      [2018-06-15 16:00:34 ]

bulk/refractory cotton/aluminium silicate/wool/insulation/zirconium Bio-soluble Ceramic Fiber Blanket

Ceramic fiber blanket is a kind of high efficient thermal insulation material, has the characteristics of easy to cut,wrap of form,temperature stability,low thermal conductivity,low heat storage,Light weight,thermal shock resistant,good dielectric strength,good flame resistanceet

TANGSHAN YINMING REFRACTORY MATERIALS CO., LTD      [2018-06-15 15:59:58 ]

slag ball/conditioner ball/steel/magnesia slag powder/mgo 65 67 71 briquette Slag Conditioner

Slag Conditioner ball is made from good quality caustic-calcined magnesia powder as raw materials, manufactured after balling under high pressure, together with adding water and binding agents,features stable quality performance, high purity, good activity. Main application the p

TANGSHAN YINMING REFRACTORY MATERIALS CO., LTD      [2018-06-15 15:58:54 ]

What safeguard do you have your waste tyre pyrolysis plant?

The Doingp\'swaste tire pyrolysis plant Doingp designs awaste tire pyrolysis plant The specific safety device mainly includes the following aspects 1. The reactor adopts a unique three-step welding process. This welding process is not easy to crack and is sufficient to ensure saf

DoingGroup      [2018-05-05 20:10:15 ]

What are the three steps to pyrolysis plastic to oil?

It is believed that many people know that the principle ofpyrolysis of plastics The first step DoingGroup adopts a vertical condenser, which can generate natural negative pressure. Under natural negative pressure, oil and steam go together to reduce the pressure of the oil outlet

DoingGroup      [2018-05-04 18:54:42 ]

How does the fractional distillation of crude oil work?

Crude oil fractionation The specific workflow ofcrude oil fractionation 1. Heat the reactor and pour crude oil. Steam out of oil and gas, impurities in the crude oil will be distilled out. 2. Distilled oil and gas enter the condensing system and is then liquefied into light oil a

DoingGroup      [2018-05-04 18:45:50 ]

Plastic to fuel conversion process

In fact, the plastic fuel conversion process can also be referred to as a plastic pyrolysis process. This process is mainly the use of pyrolysis chemical reactions, the process of crackingwaste plastics into fuel oil First, waste plastics are fed into the reactor via an automatic

DoingGroup      [2018-05-04 18:40:33 ]

What is continuous fully automatic waste tyre pyrolysis plant?

Automotive has always been a demand in our daily lives, and more and more cars mean creating more and more scrap tires. In this way, how to manage these scrap tires has become a thorny issue. In particular, the disposal of large-scale waste tires is a big problem. You can choose

DoingGroup      [2018-05-04 18:21:20 ]

Conversion of waste plastic into fuel

In order to protect and improve the environment, reduce pollutant emissions, promote the construction of ecological civilization, and respond to the country\'s call for We want both golden,silver hill and clean water,green mountains as well. , according to the latest news, enviro

DoingGroup      [2018-04-18 20:03:11 ]

Working processing of continuous waste tire pyrolysis plant

Faced with the accumulation of waste plastics, for many people this is a very vexing thing. However, for DoingGroup, it is a new market worthy of development, and the market has broad prospects. This is because the DoingGroup has the technology to deal with them and turn waste in

DoingGroup      [2018-04-16 17:18:55 ]

Diesel oil made from crude oil working process

Crude oil is basically the remains of plants and marine life that died millions of years ago. Over time, these fossil remains - hence called \"fossil fuels\" - are buried under the sand and slowly form rocks. Millions of years later, the remains of fossils slowly \"cured\" into b

DoingGroup      [2018-04-16 17:07:06 ]

Pyrolysis plant turn plastic back into oil

Millions of tons of plastic waste pollute our world. If we can turn them into fuel? This is a very worthwhile discussion topic! In the past, this was an impossible goal, but now DoingGroup has developed awaste plastic pyrolysis plant After this reaction, the fuel rate is 45-50%,

DoingGroup      [2018-04-16 16:08:36 ]

Pyrolysis plant turn plastic back into oil

Millions of tons of plastic waste pollute our world. If we can turn them into fuel? This is a very worthwhile discussion topic! In the past, this was an impossible goal, but now DoingGroup has developed a waste plastic cracking equipment, which is a closed and oxygen-free environ

DoingGroup      [2018-04-16 16:01:01 ]

Copper wire recycling machine

Due to its high electrical conductivity and corrosion resistance, it is suitable for motors and wires, pipe devices, heating elements and electronic devices. The global demand for copper is still very large. The data shows that the cost of extracting new copper resources is much

DoingGroup      [2018-04-16 15:57:37 ]

500kg pyrolysis plant sent to an energy recycling company in Denmark

500kg pyrolysis plant in DoingGroup\'s factory A Danish company is committed to the development of waste recycling and renewable energy. As the company expands its scale, it is ready to open up a broader market. After comparing several domestic and foreign waste refinery equipmen

DoingGroup      [2018-04-12 19:53:25 ]

Distillation of crude oil to diesel oil

Crude oil is composed of thousands of compounds with different properties, each of which has a different boiling point. According to the difference in the boiling point, the degree of difficulty in heat evaporation is not the same. The high boiling point is not easily volatile, a

DoingGroup      [2018-04-12 19:32:00 ]