CDS Photo Conductive Resistor
Diamond-DS Rubber conveyor belt Super abrasion resistance Super abrasion resistant for heaviest service conditions, abrasive materials with a large proportion of fines. The conveyor belt designed in accordance with a modern concept, this means a minimum number of plies combined w
Quality-Approved Chip Resistors with Sizes 0402, 0603, 0805, 1206, 1210, 2010, 2512
Carbon Film Fixed Resistors Carbon Film Fixed Resistors - Precision Metal Film Fixed Resistors - Metal Oxide Film Fixed Resistors - Fusible Fixed Resistors - Wire-Wound Fixed Resistors - Terminal Type of Metal Oxide Film Fixed Resistors - Metal Glaze Film Fixed Resistors - Jumper
.SAFY STANDARDS RECOGNIZED FOR AC APPLICATIONS 1.IDEAL FOR ACROSS THE LINE APPLICATIONS.2.COMPACT SIZE. 3.COST EFFECTIVE PRODUCT. 4.SAFY STANDARDS RECOGNIZED FOR AC APPLICATIONS. 5.SAFETY APPROVED!G(CSA, UL, VDE, SEMKO, DEMKO, NEMKO, FIMKO, SEV)
Metal Clad Wirewound Resistors TYPE DIMENSIONS(m/m) MAX Weight (g) L1 L2 W H D A0.5 B0.5 MV60 115 100 20 40 5.3 8.0 12.0 110 MV80 140 125 20 40 5.3 8.0 12.0 160 MV100 165 150 20 40 5.3 8.0 12.0 200 MV120 190 175 20 40 5.3 8.0 12.0 240 MV150 215 200 20 40 5.3 8.0 12.0 290 MV200 16
Metal Oxide Varistor element -- Silver coated disc Size available Dia. 5mm, 7mm, 10mm, 14mm, 20mm
Precision Thin Film Chip Resistor Sizes of 0402/0603/0805/1206/2010/2512at 0.01%-1% TCR 5-50ppm/
Varistors Introduction Since its establishment in 1931, NIPPON CHEMI-CON has tackled the development of a variety of electronic components, starting with aluminum electrolytic capacitors. It currently manufactures and sells aluminum and other capacitors, various precision mechani
Materials and Marking Marking VCR Materials and Marking Marking VCRElectrode Material Ag PasteCoating Material EpoxyLead Material Tin Plated Copper Wire
Simple structure Solidly fanstened the coil area with ceramic cement Controlling the speed of the heater & A/C blower motor Application Specification
HS CODE 86 >> Features TOLERANCE FROM +/- 2 AVAILABLE ON TAPE 1W ~ 7W HIGH TEMPERATURE SILICONE COATED AVAILABLE IN NON-INDUCTIVE STYLES(TYPE N) COMPLETE WELDED CONSTRUCTION >> Electrical Specification DIELECTRIC STRENGTH 500VAC MINIMUM INSULATION RESISTANCE 1000 MEG OHM MINIMUM
