Compact array type Chip Varistor for ESD, surge protection Compact array type Chip Varistor for ESD, surge protection -By size and Channel 0504-4ch, 0805-8ch -Multilayer laminated structure-Faster response time to outer overvoltage than diode-High reliability over multi surge All
Medium size thermoelectric modules S- Series Modules for traditional cooling applications Maximum temperature for short time 110
Model Resistance Range [ohms] Power Rating GENERAL SPECIFICATIONSModel ResistanceRange [ohms] Power Rating ResistanceTolerance Fan Free Air DBRI-EW 16K 2-40 9.6KW 8KW +-0.5(D)+-10(K) DBRI-EW 30K 2-12 18KW 15KW DBRI-EW 40K 2-20 24KW 20KW DBRI-EW 50K 3-20 30KW 25KW DBRI-EW 70K 3-40
A-Length 11.61mm (.457") B-Diameter 4.47mm (.176") Electrical & Physical Specifications A-Length 11.61mm (.457") B-Diameter 4.47mm (.176") Lead Dimensions .028" dia. X 1.500" long Max Watts @ 1% Tol .25 Max Volts @ 1% Tol 250 Temperature Range -55
Meiwa provides low resistance metallic film elements with high thermal resistance or fusing resistor elements Meiwa provides low resistance metallic film elements with high thermal resistance or fusing resistor elements with high fusing function, backed up by superior plating tec
MHR 40 , HIGH VOLTAGE HIGH RANGE THICK FILM RESISTOR MHR 40 , HIGH VOLTAGE HIGH RANGE THICK FILM RESISTOR
Ballast Rheostat 303 #2 Ballast Rheostat is designed for current control in the process of manual arc welding/deposition of metals with consumable electrodes from multi-operator rectifier welders and DC generators for voltages within 70 V. Into the welding circuit the Unit is con
Low Profile Series The Low Profile series complements our Standard Series of varistors. They're configured as square wire-leaded components designed to fit into a spaces where equivalent Standard Series varistors are unable to fit. A big advantage of the Low Profile Series is low
It often used in Mos- Fet, High Frequency Welders Machines and also used in higher current. It often used in Mos- Fet, High Frequency Welders Machines and also used in higher current. There is most important advantage in CCC-300, Because the face of capacitor can dissipate heat f
Wire wound resistors are made by winding the resistance wire non-corrosive, heat-proof and humidity-proof material. STYLE DIMENSION (mm) Normal Miniature L D H d KNP-1/2W KNS-1W 9.01.0 3.50.5 262.0 0.61.0 KNP-1W KNS-2W 11.51.0 4.50.5 352.0 0.81.0 KNP-2W KNS-3W 15.51.0 5.00.5 332.
Thick Film Chip Resistors Key Specifications/Special Features Chip resistors are made by depositing high-quality metal thick-film conductor on high-purity aluminum oxide ceramic substrate, and then applying a layer of glass protective coating to produce uniform quality and stabil
Thick Film Chip Resistor Sizes of 0201/0402/0603/0805/1210/1206 /2010/2512 at 1% & 5%
The resistor is connected between the neutral of power transformers or power generators and ground The purpose of a neutral grounding resistor is to limit the fault current to a safe level so that all the electrical equipment in the power system are protected
Each element is mounted on a plate and consists of 10 identical resistors. The tolerance is 5 % and the power is 1 W. Resistor decade 10 x 100 ohm03-006 - Resistor decade 10 x 100 ohmEach element is mounted on a plate and consists of 10 identical resistors. The tolerance is 5 % a
PRC/PRD/PRM type resistor providing excellent anti-surge characteristic and high performance was qualified Anti Surge Test 1.Test Circuit 2. Applied Voltage Derating Curve Specifications PRC/PRD/PRM type resistor providing excellent anti-surge characteristic and high performance
HS CODE 86 >> Features LOW COST & SWIFT DELIVERY TAPE & AMMO PACKAGE COLOR BAND MARKING AVAILABLE NON-INDUCTIVE >> Electrical Specification TEMPERATURE COEFFICIENT 100PPM /
Very good thermal and mechanical resistance together with an excellent dielectric strength. Main Uses ..................................................... Electrical motors, dry-type or dielectric oil cooled transformers, soldering machines, generators, or machines which require
Product Code MRC RESIST.001 Product WIRE WOUND RESISTANCE SATISFACTORY QUALITY, SERVICE AND PRICES FROM ELEVATOR SPARES. We take the pleasure in presenting TechnoLifts as one of the widest range of Spare parts in suburban of mumbai. Our target is to satisfy the wishes of our cu
SILITON 7500 Silicon resin base resistor coatings. Use for thermistors, metal oxide film resistors SILITON 7500 Silicon resin base resistor coatings. Use for thermistors, metal oxide film resistors, arbon film resistors, metal film resistors, fusible metal film resistors, wire-wo
