Electrical Equipment & Supplies Products and Wholesale Listings
Browse 54007 product listings in this category and compare specifications before contacting a supplier.
NXL Series strain clamp is suitable for distribution wire up to10kV, fixing the aerial insulation aluminum conductor or naked aluminum conductor on the rotate angle or insulator of terminal strain pole,and then fixing and tighting the aerial conductor. http://www jingug com
JINGU Electric Co.,Ltd [2015-08-25 11:09:04 ]
The expanilon connectors consist out of copper foils with a thickness of 0.10 mm or 0.0./0.05/0.20/0.30/0.40/0.50 on request The contact areas are manufactured in a press-welded design. The press-welding procedure is a special resistance welding process,which enables a welding of
JINGU Electric Co.,Ltd [2015-08-25 11:08:33 ]
Our copper brush wires consist of annealed wires with a diameter of 0,05/0,07 or 0,10 mm. They are characterized through their high flexibility. By using this material it is possible to manufacture components with bigger cross-sections,but small dimensions So they offer an instal
JINGU Electric Co.,Ltd [2015-08-25 11:08:31 ]
PVC-insulated cables manufactured out of highly flexible uncoated Copper wires Well suited as electric connections inside of switchgears or switchboards as well as inside of vehicles Additional applications as connecting leads http://www jingug com
JINGU Electric Co.,Ltd [2015-08-25 11:07:54 ]
Flexible round stranded copper wies is used as flexible jointing wire in electric and distribution appliance.,electric equipment and thyristor etc. Flexible round stranded copper wires are manufactured out of high-quality copper wires or tinned copper wires wth a diameter of 0.15
JINGU Electric Co.,Ltd [2015-08-25 11:07:52 ]
Manufactured by flexible uncoated or tinned copper cables with a wire-0,15mm or 0,05/0,07/0,10 mm on request with copper terminals. Manufacturing in large as well as small quantities in length acc. to your wishes. On request it is also possible to order an insulated design . When
JINGU Electric Co.,Ltd [2015-08-25 11:07:43 ]
The braided copper wire can be used for the flexible conductor of electric installation,switch gear,electric furnace,storage battery,etc. The braided copper tapes consist of wires which is braiding a number of spindles0f best quality round copper wires or soft tinned wire to beco
JINGU Electric Co.,Ltd [2015-08-25 11:06:46 ]
NXJ Series insulation strain olamp NXJ series is suitable for strain clamp insulation string of 10 aerial insulation aluminum core wire JKLYJ terminal or two ends fixing and tighten aerial insulation The shell made of anti-oxidate high strength aluminum alloy,Withoutwaste power T
JINGU Electric Co.,Ltd [2015-08-25 11:06:42 ]
NXJ Series wedge type aluminum alloy over-tension resistant clamp NXL series wedge type aluminum alloy overtension resistant clamp is applicable for the terminals of1KV and10KV( including not more than10KV) aerial insulating aluminum core line,or it is used in the overtension res
JINGU Electric Co.,Ltd [2015-08-25 11:06:03 ]
JNS series four-core-centralized strain clamp For use with the end of aerial insulation lines up 1kV, tighten up the insulation conductor The clamp has designed four core parallel groove, after clamping the four insulation conductor(not remove the insulation layer). tighten up th
JINGU Electric Co.,Ltd [2015-08-25 11:06:01 ]
Uncoated or tinned Copper braid, flexible wire-0,15mm(standard) or 0,05/0,07/0,10 mm on request with solderless pressed contact areas made out of tinned or uncoated, seamless Copper tubes. Contact areas rectangular without bending protection(standard). With or bending protection
JINGU Electric Co.,Ltd [2015-08-25 11:05:33 ]
Manufactured out of flexible braided copper tapes made out of annealed, tinned Cu-ETP1 wires,with solderless pressed terminals. Everywhere applicable where connections with smaller cross-sections made out of braided copper tapes are needed http://www jingug com
JINGU Electric Co.,Ltd [2015-08-25 11:05:31 ]
Manufactured by flexible PVC-entruded braided copper tapes with solderless pressed contact areas made out of seamless Cu-ETP-tubes The crimping process is realized without using additives like tin or soldering and welding additives. We use exclusively materials of same analysis a
JINGU Electric Co.,Ltd [2015-08-25 11:05:30 ]
LS108G Eyeglass lenses meter p rofessional for optical transmittance test for lens. Test ing U V400 ultraviolet transmittance, visible light transmittance and the maximum UV wavelength blocking. Parameter 1. Size 200mm*180mm*106mm(L*W*H ） 2 . Weight about 1500g 3 . Resolution m
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 11:48:05 ]
BST-FGS-SC Silicone Coated Fiberglass Braided Sleeve, any color is ok. Used to protect transformer lead protection, motor coil leads, component isolation, and power supply wiring. Voltage from 1.5 KV to 10 KV. It is resists most acids and alkalis and is unaffected by most bleache
BST Thermal Protection Products Co.,Ltd [2015-08-22 16:56:54 ]
BST-FGS-ESC Silicone Extruded fiberglass sleeve is a combination of silicone and rubber extruded onto a braided fiberglass sleeving. It is used as insulation of leads and connections in electrical and electronic components (transformers, coils, relays, solenoids etc.) It is resis
BST Thermal Protection Products Co.,Ltd [2015-08-22 16:53:39 ]
Self Fusing Silicone Tape is the Original self-fusing silicone insulating & repair wrap. Self Fusing Silicone Tape is extruded of 100% high performance silicone elastomer. Ingredients in the silicone cause it to permanently bond to itself when stretched and over-wrapped to itself
BST Thermal Protection Products Co.,Ltd [2015-08-22 15:45:29 ]
Brand new High quality HDMI Port Socket Interface Connector for Sony Playstation 4 PS4 Console Used to Replace the Broken/no signal HDMI Port for your PS4 motherboard repair. 100% tested working,Best solution to solve the pins inside the ps4 jammed and broke off. Specification Ve
SparePartStop Co., Ltd [2015-08-22 15:45:18 ]
Heat Reflective self-wrapped Aluminum Fiberglass Sleeve designed to provide thermal protection from both radiant and convective heat. Composed of a woven fiberglass base fabric and a lamination of aluminum foil, the product can withstand convective heat soaks up to 200ºC and sim
BST Thermal Protection Products Co.,Ltd [2015-08-22 14:04:56 ]
Aluminum die casting enclosures,the IP65.Wire tube connected to the junction box, line the inside of the tube wire connected in the junction box, protect the wire and the connection wire, we also call them terminal block. http://www sanhe-enclosure com
Cixi Changhe Sanhe Metal Enclosure Limited [2015-08-21 16:52:51 ]
