HY302#Epoxy Resin

Description HY302# epoxy resin is composed of two components, resin and curing agent, with mix ratio of 4 1 ( Resin Cure Agent = 4 1 ) , suitable for and amine curing agents or their additive , It can be cured at room temperature and heated Cured. Application Widely used in Pain

深圳红叶杰硅胶厂      [2014-09-29 04:51:09 ]

HY103# Unsaturated Resin

Description HY103# with high hardness, not easy to be broken, suitable for the production of many crystal crafts production Application Suitable for production of crystal lamp, candle holder, crystal crafts, crystal gifts, crystal trophy,crystal vase, crystal model building mode,

深圳红叶杰硅胶厂      [2014-09-29 04:50:15 ]

WMZ050# Non-Alkali Roofing Mat

Description Roofing mat is a good fiber base for making SBS modified bitumen waterproof roller sheets and colored Fiberglass reinforcement asphalt shingle . And since the whole mat is with longitudinal reinforcement, so the tensile strength and tear strength is be increased stron

深圳红叶杰硅胶厂      [2014-09-29 04:49:11 ]

BMZ020#Non-Alkali Glass fiber surface mat

Description Glass fiber surface mat is mainly used in the surface layer of glass products. Divided into two categories specific wound type series (S-SM)and hand lay-type series (S-HM) Characteristic Fiber distribution evenly, finished products with smooth surface, corrosion resis

深圳红叶杰硅胶厂      [2014-09-29 04:48:17 ]

Roofing Mat

R oofing Mat Description Roofing mat is a good fiber base for making SBS modified bitumen waterproof roller sheets and colored Fiberglass reinforcement asphalt shingle . And since the whole mat is with longitudinal reinforcement, so the tensile strength and tear strength is be in

深圳市红叶杰科技有限公司      [2014-09-27 19:58:50 ]

Glass Fiber Cloth

Description Glass Fiber cloth is compiled by untwisted direct roving with plain weave, is mainly for unsaturated polyester resins , vinyl resins , epoxy and phenolic resins , etc. Application Widely used for hand laying fiberglass products such as the hull , automobile, airplane

深圳市红叶杰科技有限公司      [2014-09-27 19:57:32 ]

Rheological Additive For Solvent Based System (organoclay)BK-192T

Products Specifications BK®-192T is an organoclay (tetraallkyl ammonium bentonite) for oil-based drilling mud (fluid). Advantages ☆Impart viscosity and suspension propertiesto oil-based drilling fluids. ☆Used to gel oil drilling fluids for long-term suspension of weighting a

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:26:24 ]

Rheological Additive For Solvent Based System (organoclay)BK-388

Products Specifications BK®-388 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity. Advantages ☆ High gelling efficiency over low, medium and high polarity organic liquids. ☆ Produce reproducible thixotropic consistenc

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:26:02 ]

Rheological Additive For Solvent Based System (organoclay)BK-882S

Products Specifications BK®-882S is an organoclay (tetraallkyl ammonium bentonite) for oil-based drilling mud (fluid). Advantages ☆ Good suspension,thixotropy and stability in crude oil,diesel oil systems. ☆ Easy of incorporation. No need for polar activator or making pregel

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:25:40 ]

Bentonite BK-181

Products Specifications BK-181 bentonite(used in Water based well drilling mud) Hangzhou Jingyi Chemical Co., Ltd use the high quality of bentonite to produce the well drilling mud. This product is according with GB-T5005-2001(eqv ISO13500 1998) standard, it has good suspension,

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:25:05 ]

Bentonite BK-181N

Products Specifications BK®-181N Well Drilling Mud Bentonite BK-181N Bentonite swells greatly when it meets water. It owns excellent colloid nature and can increase the viscosity of suspend fluid. While it is applied in well drilling mud, it can improve the lubricating property

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:24:40 ]

Activated Clay CS-1040

Products Specifications CS-1040 Activated Clay Model: CS-1040 Introduction: Good absorption and discoloration, iron exchange, acid catalysis and swelling performance. Description:Application CS-1040 activated clay is used in industry vegetable fat, edible vegetable oil, whi

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:24:22 ]

Bentonite BK-035A

Products Specifications BK®-035A Foundery Grade Bentonite It is mainly used as molding sand adhesives in cast iron,cast steel It has higher content of montmorillonite,better green strength and hot strength,higher swelling property and better heat stability compared with similar

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:23:55 ]

Bentonite BK-101

Products Specifications BK®-101 Waterproof Engineering Grade Bentonite Because bentonite has extremely strong water absorbing and swelling property, it is very useful to exterior wall waterproofing for various underground engineering. Because after meeting the water, the compres

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:23:19 ]

Bentonite BD-1

Products Specifications BD-1 clay desiccant BD-1 clay desiccant is made of the natural bentonite mineral as the raw material by the special process purifying. This new desiccant has high quality and reasonable price. It can replace (or partly replace)the silica gel desiccant. Wit

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:22:17 ]

Bentonite BK-045

Products Specifications BK-045 Paper Industry grade Bentonite BK-045 is Na-Bentonite, It presents strong colloidal properties and its volume increases several times when coming into contact with water, creating a gelatinous and viscous fluid. It is used to modified starch adhesiv

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:21:21 ]

Activated Clay CS-1060

Products Specifications CS-1060 Activated Clay Model: CS-1060 Introduction: Good absorption and discoloration, iron exchange, acid catalysis and swelling performance. Description: Application CS-1060 activated clay is used in the refining of edible vegetable oil, medicament

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:20:59 ]

Rheological Additive For Solvent Based System (organoclay) BK-100A

Products Specifications BK®-100A is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low, medium and high polarity. Advantages ☆ High gelling efficiency over low,medium and high polarity organic liquids. ☆ Easy of incorporation No need for polar ac

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:20:36 ]

Rheological Additive For Solvent Based System (organoclay) BK-888

Products Specifications BK®-888 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. Advantages ☆ High gelling efficiency over low to medium polarity organic liquids. ☆ Ideal thixotropy property and anti-sediment property.

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:20:06 ]

Rheological Additive For Solvent Based System (organoclay) BK-922

Products Specifications BK®-922 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. Advantages ☆ High gelling efficiency over low to medium polarity organic liquids. ☆ Easy of incorporation. No need for polar activator or ma

Hangzhou Jingyi Chemical Co.,Ltd      [2014-09-26 00:19:40 ]