GD-DH series hydrocarbon resin is water white DCPD hydrogenated hydrocarbon resin derived from cyclic ingredients. DCPD hydrogenated petroleum resin is designated to tackify for a variety of adhesive polymers including EVA, SIS, HMA, HMPSA, SBPSA. Soluble in most aliphatic and ar
Henan G&D Chemical Products Co., Ltd. [2017-03-30 16:01:13 ]
Resins Characters Light colored and transparent granule Applied in tyre rubber compounding,which have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, polyethylene, polypropylene, Styrene-Isoprene-Styrene (SIS), Styrene
Henan G&D Chemical Products Co., Ltd. [2017-03-30 16:00:13 ]
C5 hydrogenated hydrocarbon resin ,its raw materials are C5 fraction which is pyrolysis by the ethylene. C5 hydrogenated hydrocarbon resin is a C5 component of the diene and single-ene by cationic polymerization. Appearance granular solid, white or yellowish Compatibility Easily
Henan G&D Chemical Products Co., Ltd. [2017-03-30 15:58:58 ]
59C Series Copolymerized hydrocarbon Resins are thermoplastic resins, C5, C9 fraction of petroleum by-product of decomposition with processing pre-treatment, polymerization and distillation. 59C Series Copolymerized hydrocarbon Resins have advantages both of C5 and C9 petroleum r
Henan G&D Chemical Products Co., Ltd. [2017-03-30 15:58:00 ]
C9 aromatic hydrocarbon resin is a petroleum by-product of pyrolysis C9 fraction which is produced by pre-treatment, polymerization and distillation processes. It is not a high polymer but a low polymer molecular weight between 300-3000. Light colored granule Low acid value, good
Henan G&D Chemical Products Co., Ltd. [2017-03-30 15:56:56 ]
This kind of C5 aliphatic hydrocarbon resin is applicable for hot melt road paint, which can enhance the tenacity, hardness and adhesive force of the paint, then form smooth paint surface, and could keep its stability in different temperatures of seasons by adding auxiliary agent
Henan G&D Chemical Products Co., Ltd. [2017-03-30 15:55:45 ]
Light colored and transparent granule Make the initial adhesion performance; cohesive strength and peel strength reach the best balance Super aging resistance performance Good fluidity which can improve the wetting property of master material. Narrow molecular weight distribution
Henan G&D Chemical Products Co., Ltd. [2017-03-30 15:54:10 ]
The PRIMER - FAC is an halogenant/halogenator for SOLES in RUBBER , TR , TUNITH used before applying the POLYURETHAN GLUE. USING INSTRUCTIONS Apply the product with a brush in the whole soles. After at least 30minutes you can apply the polyurethan glue. The products is very sens
FAC BG Srl [2017-03-23 23:14:22 ]
CROSSLINKER FOR WATER BASED ADHESIVE Attivatore DN is an activator that can be added to water based adhesive Idrotex. To improve the grip and the heat resistance. Made in Italy by Fac BG Srl.
FAC BG Srl [2017-03-23 23:12:03 ]
HOT MELT ADHESIVE Universal hot melt adhesive. For wood, paper, cardboard, leather, skin. Available in yellow or transparent colour. Working temperature 180-200° C. Made in Italy by Fac BG Srl.
FAC BG Srl [2017-03-23 23:09:44 ]
ANTI-FOAM Silicone anti-foam used in various industrial applications to control or to eliminate foam generation thereby optimizing productivity. Suitable for water based adhesive Produced in Italy by Fac GB SRL.
FAC BG Srl [2017-03-23 23:08:12 ]
Water or solvent-based impregnating solution. Water-based impregnating solution PC Coating is a water based product ideal for molding various kinds of hats. Solvent-based impregnating solution PB Coating is an ideal product used for molding various kinds of hats.
FAC BG Srl [2017-03-23 23:06:55 ]
Stain Remover for Varnished Leathers. EcoBrill is a solvent used to cleanse leathers and fabrics, shiny or varnished from stains and glue excess and it can be used on most of delicate materials. Apply with a sponge and brush.
FAC BG Srl [2017-03-23 23:05:06 ]
SOLVENT FOR CLEANING AND FOR DILUTE POLYCHLOROPRENE ADHESIVE S 700 is a solvent mixture to dilute polychloroprene adhesive type “CU”. Excellent also to clean brushes and machinery. Made in Italy Adhesives and solvents.
FAC BG Srl [2017-03-23 23:04:08 ]
Ecological Natural Rubber Based Adhesive with High Viscosity. Super Light Eco - Mastic is an ecological natural rubber based glue used for the construction of uppers in bondings. Leather will keep flexibility throught time. Apply with a brush to both sides.
FAC BG Srl [2017-03-23 23:01:51 ]
POLYURETHANE ADHESIVE WITH MEDIUM-HIGH VISCOSITY Neoplastic ABR is a monocomponent polyurethane adhesive suitable for sticking leather and synthetic materials on soles . It can be reactivated at about only 50° C. It is possible to increase performances adding activator Desmodur
FAC BG Srl [2017-03-23 23:00:54 ]
VINYL BASED ADHESIVE FOR WOOD BONDINGS WITH HIGH VISCOSTY Apavil 90 is a plasticized polyvinyl acetate acqueous dispersion with quick initial setting time. It can be used in hot and cold conditions. Brush application.
FAC BG Srl [2017-03-23 22:59:07 ]
WATER DISPERSION ADHESIVE WITH LOW VISCOSITY AND HIGH RESISTANCE TO HEAT The IDROTEX 200 is a water based polyurethan adhesive used for sticking of synthetics on soles of different materials changing only the preparation of the soles. By spraying. High Crystallization CHARACTERIS
FAC BG Srl [2017-03-23 22:57:59 ]
WATER DISPERSION ADHESIVE WITH LOW VISCOSITY Lattice puro /R is a natural latex based adhesive. Suitable for bonding leather and other application. Its formulation give a very strong initial grip. The PURE LATEX is a water based adhesive of natural rubber\'s latex with REXIN used
FAC BG Srl [2017-03-23 22:55:57 ]
Pure Latex Water Based Adhesive is ideal for solution appliers with rolls. The PURE LATEX is a water based adhesive of natural rubber\'s latex used for assembly of lining, cover with leather and various process of Juntery. CHARACTERISTICS Viscosity 200+/-50 Cps USING INSTRUCTION
FAC BG Srl [2017-03-23 22:54:44 ]
