Oxidized Bitumen or Blown bitumen grades are produced by passing air through the penetration grades. The most popular grades are; grades 95/25
Peak Universal Business [2019-07-31 15:42:39 ]
Hawach glass fiber extraction thimbles
Hawach Scientific Co.,Ltd. [2019-07-19 10:05:11 ]
Moderate retention and flow rate are most frequently used in 11 μm daily filtration. It is widely used in laboratory applications to clarify liquids. It is used for the quantitative analysis and separation of precipitates, such as lead sulphate, calcium oxalate and calcium carbo
Hawach Scientific Co.,Ltd. [2019-07-19 09:51:01 ]
The cleanroom made and fresh sterilization make the sure longer lifetime The grid lines facilitate can easy for contrasting when colonies counting and the membrane filters
Hawach Scientific Co.,Ltd. [2019-07-19 09:49:27 ]
Ultrasonic welding ensures no contaminant to samples Protect any analytical system, extend LC column
Hawach Scientific Co.,Ltd. [2019-07-19 09:47:32 ]
Neutral Alumina is currently the second most popular packing material in flash chromatography. It is excellent for the purification of a compound with those properties is considered. The Neutral Alumina Flash Columns
Hawach Scientific Co.,Ltd. [2019-07-19 09:41:32 ]
Hawach Mixed Mode C8 SAX SPE Cartridges
Hawach Scientific Co.,Ltd. [2019-07-18 17:13:29 ]
The is a special liquid performance chromatography column
Hawach Scientific Co.,Ltd. [2019-07-18 17:12:35 ]
1. The film is wound around a strong core with the metallized layer facing inward. After the film has been wrapped, there will put a paster on the margin. The specified external disk diameter can be achieved In addition, the coils are separated by plastic foam to protect the elec
Anhui Imp & Exp Co.,Ltd. [2019-07-17 09:56:19 ]
1.Basic Information (1) MPP Film Type Metallized Polypropylene Film For Capacitors (2) Width 4.5-130mm (3) Thickness 1.6-12um (4) Margin Value 0.5mm 1.0mm 1.5mm 2.0mm 2.5mm (5) Specification Metallized Film For Capacitors (6) Types Of Metallized Layer Al Metallized Film、Zn/Al M
Anhui Imp & Exp Co.,Ltd. [2019-07-17 09:12:44 ]
The PU adhesive used on autoglass bonding and sealing. The two typical models are JPU-120A and JPU-120AT, Price range is $1.33-$1.58/310ml Advanta g es One component, easy to application , free solvent, non-toxic odorless after curing , environment-friendly Self-leveling, excelle
joy-free [2019-07-15 14:27:08 ]
Ca-Zn stabilizer CS-50 Description Ca-Zn stabilizer CS-50 is Calcium-zinc based stabilizer used for PVC Profiles, Pipes application etc. Key property l Excellent thermal stability. l No plate-out. l Keep the primary colors. l Outstanding weather-ability. l Stable process ability
Shandong Polymer Additives Co., Ltd [2019-06-09 22:22:27 ]
Lead stabilizer for PVC profiles LS-35 Description Lead stabilizer LS-35 is compound stabilizer used for PVC profiles application. Key property l Endow the PVC melt with eminent thermal stability l Enhance the dispersibility of fillers in the PVC resin l Improve the whiteness and
Shandong Polymer Additives Co., Ltd [2019-06-09 22:07:31 ]
Description Lead stabilizer LS-28 is compound stabilizer used for PVC Cables application. Key property l Endow the PVC melt with eminent thermal stability l Enhance the dispersibility of CaCo 3 in your recipe. l Improve the mechanical properties. l Endow your recipe with higher d
Shandong Polymer Additives Co., Ltd [2019-06-09 22:05:02 ]
Description Lead stabilizer LS-25 is a high efficiency and multifunctional high technology product. It is widely applied in PVC foaming board, profiles, pipe, pipe fitting, WPC, foamed sheet and other PVC plastic products. Key property It has very good dispersibility and compatib
Shandong Polymer Additives Co., Ltd [2019-06-09 21:56:49 ]
Description CPE-135A is widely used for rigid PVC products, such as PVC window profile, pipe, fence, siding and so on, WPC product, etc. Key property l Excellent elongation rate at break l Endow PVC finish products with good toughness l Increase the corner welding strength of PVC
Shandong Polymer Additives Co., Ltd [2019-06-08 00:08:18 ]
Description AIM-50 is mainly used in PVC window profile, PVC pipe and pipe fitting, PVC fence, PVC siding and decking, PVC panel,etc. Key property l Promote fusion l Improve impact strength l Improve weather-resistance Specification Specification Unit Test standard AIM-50 Appeara
Shandong Polymer Additives Co., Ltd [2019-06-07 23:59:06 ]
Description P-175 can be widely used for rigid PVC products such as Windows profile, PVC pipes, PVC pipe fitting ,PVC foaming products, WPC product, etc. Key property l Improve metal release with no influence on fusion l Improve heat stability l Improve melt flow ability l Improv
Shandong Polymer Additives Co., Ltd [2019-06-07 23:31:02 ]
