64/110kV XLPE Cable Termination
Product Details
Application:
For 400-1000mm2 XLPE Power cbale, with normal cross
Section from 400-1000mm2.
Used Area: Outdoor, indoor, coastal and pollution area.
Environmental temp.: -40 ~ +40 degree.
The termination is premoulded stress relief tyoe procelain termination. The long-term operating temp, Max allowable temp and current capacity and so on is satisfied with the requirements of
suitable cable.
XLPE Cable Termination
Voltage:64/110KV
Standard: IEC840-88
Material: Porcelain
- Type:Screw Terminal
- Model Number:JCW
- Brand Name:LS
- Place of Origin:China (Mainland)
- Country:China (Mainland)
- telephone:86-20-38798101
| Minimum Order Quantity: | 5,000 Piece/Pieces |
| Payment Terms: | L/C,T/T |
| Type: | Screw Terminal |
| Model Number: | JCW |
| Brand Name: | LS |
| Place of Origin: | China (Mainland) |
You may also like
Send inquiry / quota request to 64/110kV XLPE Cable Termination
Relate products of 64/110kV XLPE Cable Termination
XLPE electrical wire 4 core power cables are normally used in power transmission and distribution systems. The power cable 4 core XLPE cable is referred to as IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is ...
The structure of 10mm 4 core and earth cable+1 earth is designed for application where the earth wires are required according to customer requirements. These 4 core and earth cable are often referred 16mm xlpe 4 core +1 cables XLPE insulated with voltage 0.6/1000v or IEC60502 4 ...
XLPE insulated 3 core power cable is normally used in power transmission and distribution systems. The three core cable wires are referred to IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the ...
The structure of 3 cores+1 earth cable wire is designed for application where the earth wires are required according to customer requirements. This three core and earth is often referred 3 cores +1 cables XLPE insulated with voltage 0.6/1000v or IEC 60502 3 core and earth ...
XLPE power cables are normally used in power transmission and distribution systems. The xlpe 2cores flat cable is referred to as IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the size above and ...
Our low voltage xlpe control cable (or power cable with cross-linked polyethylene (XLPE) insulation) is intended for distribution and supply of consumers in industrial installations and urban networks with nominal voltages of 0.6/1 kV and frequency of 50 Hz. , which play an ...
Come From HENAN HONREY CABLE CO.,LTD
Our xlpe control cable has been used more and more in recent years, especially after it has become a special control cable for 220kV high voltage distribution devices. People\'s requirements for the performance of its products are increasingly high. XLPE insulated control cable ...
Come From HENAN HONREY CABLE CO.,LTD
XLPE electrical wire 4 core power cables are normally used in power transmission and distribution systems. The 4 core XLPE cable is referred to IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the ...
The structure of 4 cores+1 earth is designed for application where the earth wires are required according to customer requirements. These 4 core and earth cables are often referred 4 cores +1 cables XLPE insulated with voltage 0.6/1000v or IEC60502 4 core and earth cable. As a ...
XLPE insulated 3 cores power cable is normally used in power transmission and distribution systems. The three core cable wires are referred to IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the ...
