Used in multiple industries such as ground mounted solar, flags, signs, tents, levee shoring, wave amplitude diversion, oil pipeline sensor mount, emergency shelter (military/civial temporay or permanent), soil erosion barriers, temporar fencing/signs, static line tensioning, tents, tele-comunications, radio toweres, fencing permanent, horticulture (vineyard truses, tree stabilizing), bollards (non-crash), and more.
Load capacity from 4,000 to 25,000 fp upload and lateral loading, depending on the soil composition. Calssified as catagory 56, tempporary/long term. In that it can be screwed into the ground, it can be unscrewed and reused in temporary applications. Superior to a "screw anchor" offering limited holding capacity offering three loading surfaces.Soil compression anchors offer 5 load bearing surfeaces for added strength and holding power.
Receives to mount multiple configuration of vertical uprights, square, round, irregular and all with only one component anachor unit. Stabilization is achieved with compression ring clamping by tightening cap,adjustable from 2 3/8 inch to smaller.
Soil compression earth auger anchors are not designed to dig a hole. Rather, they are screwed into the ground using a 3/4inch square drive ratchet w/extension, "t" handle, impact gun or hydraulic tractor powerhead. As the anchor rotates into the soil, it packs the soil tighter and increases the density of the soil providing a stronger holding capacity. Can be installed vertically or horitontally, above ground or under water.
Soil compression screw type earth auger anchor mounting
Minimum Order Quantity: | 12 Unit/Units |
Payment Terms: | Western Union,MoneyGram,credit card |
Port: | DFW |
Fob Price: | US$67.00DFW |
Capacity: | 25,000lbs. |
Length: | 25 inches |
Diameter: | 2 1/2 inches |
Material: | Steel |
Type: | soil compression screw type earth auger anchor |
Model Number: | ST1 |
Brand Name: | Skru-Tyte |
Place of Origin: | Texas United States |
Here at Anchor Locksmith Store We are a full service Locksmith company in Minneapolis, MN Metro area, that proudly provides Locksmith services. our fully equipped Locksmith service vehicles and technicians are available for all your Locksmith needs Residential Commercial and ...
Come From Anchor Locksmith Store
U Anchors are designed to provide superior grip and protection in concrete, masonry, and other hard surfaces. Their unique U shape design allows for a tight fit in almost any hole, making them one of the most secure anchors available. With a wide range of sizes, styles, and ...
Come From Wuhu Ping'An Rubber Co., Ltd.
Structured with a safety bolt, this shackle offer a double safety. The bolt, nut and safety pin prevents accidental unscrewing during lifting operation. Galvanized surface offers a long-term durability of corrosion resistance. Particularly important for use offshore and it is ...
Come From CHONGQING TITAN SUHE TECH CO., LTD
U Anchors are designed to provide superior grip and protection in concrete, masonry, and other hard surfaces. Their unique U shape design allows for a tight fit in almost any hole, making them one of the most secure anchors available. With a wide range of sizes, styles, and ...
Come From Wuhu Ping'An Rubber Co., Ltd.
Shaft material: 40Cr(ASTM A5140) or 45#(ASTM 1045) steel. Helix plate: ASTM A36 hot rolled plate, available in 3/8\'\' and 1/2\'\' thickness. All helix leading edges sharpened and rock cut and 45 degrees. Corrosion protection: ASTM A153, hot dipped zinc coating. Efficient ...
Come From Better Screw Co.,
Shaft material: Seamless high tensile pipe, conforms to ASTM A500 GRADE B or Customized. Helices material: ASTM A36 hot rolled plate. Corrosion protection: ASTM A153, hot dipped zinc coating. Leading edge of helices beveled 45 degrees. Greater section modulus strength to resist ...
Come From Better Screw Co.,
Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A499, Grade 60. All kinds of specification including 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more. 3/8\'\' or 7/16\'\' diameter holes on ...
Come From Better Products Co.,
Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A1011, Grade 50. Yield strength after cold-forming is 60,000 psi minimum. Posts are manufactured from hot-dipped galvanized steel conforming to ASTM A653, G90 or G140. The posts are ...
Come From Better Products Co.,
Shaft material: 40Cr(ASTM A5140) or 45#(ASTM 1045) steel. Helix plate: ASTM A36 hot rolled plate, available in 3/8\'\' and 1/2\'\' thickness. All helix leading edges sharpened and rock cut and 45 degrees. Corrosion protection: ASTM A153, hot dipped zinc coating. Efficient ...
Come From Better Screw Co.,
Shaft material: 40Cr(ASTM A5140) or 45#(ASTM 1045) steel. Helix plate: ASTM A36 hot rolled plate, available in 3/8\'\' and 1/2\'\' thickness. All helix leading edges sharpened and rock cut and 45 degrees. Corrosion protection: ASTM A153, hot dipped zinc coating. Efficient ...
Come From Better Screw Co.,