GAS LIQUID SEPARATORS TYPE T AND ST CAST

If you would like us to contact you regarding an application or product, please .

for Type T & ST Cast Literature. 

We Can Help
Choosing the right gas/liquid separator can present unique problems not encountered in choosing other pipeline components. Why not take advantage of Eatons over 100 years of application experience with gas/liquid separators? Application specialists are available to help you every step of the wayfrom initial selection, to installation and through start-upjust contact us.

Choose Cast or Fabricated Construction
Type T Gas /Liquid Separators are available in sizes up to 4 in cast iron and up to 2 in cast carbon steel or cast stainless steel with standard configurations. Cast construction separators are readily available but are not easy or cost effective to modify to conform to special application requirements. For these applications see page 10 for Fabricated Type T Separators made of carbon or stainless steel in sizes up to 24. Because they are constructed to specification they can be easily modified to suit unique applications such as those that require radially rotated inlet and outlet connections. Fabricated separators are not as heavy as cast ones, an important consideration in applications where weight is a concern. Cast or fabricated EATONs Eaton Type T Gas/Liquid Separators lets you choose the best on for your application.

Application Flexibility
The basic Type T Gas/Liquid Separators straight forward, time proven design fits most applications without options. For more specialized applications the Type T is available as the Type ST with an integral trap as part of its design. The trap mechanism is a foolproof design which automatically ejects the condensate, without loss of line pressure, when it reaches a predetermined level. The Type ST is compact, easily installed and can be supported by the line. Removal of the bottom flange releases the trap mechanism for inspection. The internal trap components are rustproof stainless steel and include a non-magnetic 18-8 stainless steel valve and seat. For applications below freezing the Type ST Separator can be ordered as the Type STH that includes a heater for the trap. The heater is rated at 50W and is for 110 volt service. The self limiting heating element will keep fluid above freezing and does not add to the line temperature. The heater can be easily removed for inspection.

Exclusive Design
Moisture laden gas enters the inlet of the separator where it is deflected in a centrifugal downward motion. The entrained solids and moisture droplets are separated out by a reduction in velocity. Separated liquid and solids fall into a reservoir where Eatons exclusive Vortex Containment Plate (VCP) ensures that they cannot be re-entrained. The clean, dry flow is then directed to the outlet by the Vortex Containment Plate. The VCP eliminates the need for expensive, delicate baffles used in ordinary separators.

High Efficiency No Maintenance
Eatons Type T Eaton Gas/Liquid Separators automatically remove 99% of all liquid and solid entrainment particles 10 microns in size or larger from air, gas, and steam processes. And they do it with no moving parts to wear out and with no required maintenance. The Type T, with its cost effective design, is the separator of choice for most applications that require clean, dry air, gas or steam..

Options

Overview  
 
Features