Overview:
JRD-190 lubricant is composed of calcium fatty acid,extreme pressure agents and anti-caking agent, mainly used in mechanical descaling low wire, stainless steel wire, gas shielded welding wire, spring wire, tire edge wire, prestressed steel wire, rope wire drawing and so on.
Performance:
Fatty acid content: 40%-45% Color: light yellow
Softening point: 150-280 ℃ Water content: 0.4-1%
Decomposition temperature: 390-440 ℃ Size: medium particles
Application:
Mainly used in non-acid, phosphate, boron-treated steel, and also can be used in front passes of the drawing, or you can use in all passes, can make coating thicker, later when use sodium or sodium-calcium-based lubricant, the speed when drawing big size wire can reach 180-480m/min, when drawing small size wire can reach 360-720m/min.
Diamond Wire Drawing Die Blanks E-Grind is one of professional wire drawing dies suppliers , we provide two series of PCD wire drawing die blanks : CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is ...
E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is PCD Wire ...
E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is PCD Wire ...
Diamond Wire Drawing Die Blanks E-Grind is one of professional PCD wire drawing dies suppliers and diamond dies manufacturers, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 ...
Metal tech Pointing Machine is It is the auxiliary machine of the wire drawing machine, which is used to roll the wire into thin pieces so as to pass through the drawing die of each pass at the initial stage of drawing. Get pointing machine for wire drawing directly from wire ...
Technical specification: 8 blocks 550mm 5.5mm inlet to 1.8 mm outlet Low carbon steel material Designed with Rotating die holder The drawing machine including: Wire scaling and brushing system Dead block machine Complete electrical control board Power: 380 V 60 Hz ...
The diamondpcd wire drawing dies are produced under ultra-high temperature and ultra-high pressure. It consists of diamond powder and metal catalyst (Cobalt). It features high wear resistance, hardness and thermal conductivity, high mechanical strength, and tenacity.Diamond ...
Wire drawing machine is used for steel, aluminum, copper and other metal wire drawing. The metal wire rod can be drawn by single machine of the unites depends on its sizes. Along with Wire\'s drawing, the rear coiling block is accelerated. simplicity of operator, efficient, ...
Wire drawing machine is used for steel, aluminum, copper and other metal wire drawing. The metal wire rod can be drawn by single machine of the unites depends on its sizes. Along with Wire\'s drawing, the rear coiling block is accelerated. simplicity of operator, efficient, ...
Min. Order:239/Pieces Product Code:B01C001C059 Processing Level:unground Grade:YG8 N.W:4.2/Grams Specification:OD8*ID0.8*H6 MM Tolerance:OD: -0.1+0.2; ID-0.05-0.12; H: -0.15+0.15 MM Shipping:Free Shipping to United States via ePacket Operator telephone:0086 ...