Anmei A1006F is a kind of material PA6 GF30, which is the injection grade resin by mixing the 30% glass fiber and heat stabilized polyamide 6. Typical Application of PA6 GF30 heat stabilized (A1006F) Injection reinforced grade PA6, containing 30% glass fiber, is with heat ...
Nylon66 PA66 Heat Stabilized Description Nylon66 PA66 Heat Stabilized a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, good ...
PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need ...
Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. Typical Application of pa6 6 gf30 Heat Stabilized (A2006F) The material gf30 material thermal stability typically works for automobile engines, motor accessories such as engine covers, ...
PA66GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with high ...
PA66GF15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESSING: Pre-drying: 4-6h / 130°C Processing: Melting temperature 280 - 300 °C Mold temperature 60 - 100 °C Product storage and ...
Nylon66 PA66 Heat Stabilized Description Heat stabilized nylon PA66 a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, good ...
PA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESSING: Pre-drying: 4-6h / 130°C Processing: Melting temperature 280 - 300 °C Mold temperature 60 - 100 °C Product storage and ...