P/N: 20612-02-33 (646490557) Shaft
Tobee® offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.20612-02-33 (646490557) Shaft.
The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6×5×11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Mission Magnum Parts list:
Item | Qty | Part No. | Processing# | Description | Material |
1* | 1 | See below | See below | Casing | Hard iron |
1A | 1 | 10399-46-1 | 648403012 | Gasket,casing | Vellumoid |
1B | 12 | 3932-61 | 648402014 | Nut,casing | Stl |
1C | 12 | 3862-76 | 648401115 | Stud,casing | Stl |
1D | 1 | 8505-04-01 | 86485503 | Plug,Casing Drain | Stl |
1E | 1 | 8505-04-01 | 646400507 | Plug,flush line | Stl |
2* | 1 | See below | See below | Impeller | Hard iron |
2A | 1 | 19110-72 | 64845082 | Seal,impeller | Viton |
2B | 1 | 7300239 | Washer,impeller | Stl | |
2C | 1 | 7415648 | Bolt,impeller lock | Stl | |
3* | 1 | 22223-01-30 | 641116157 | Stuffing box,mech.seal | Hard iron |
3* | 1 | 20614-01-30 | 643365042 | Stuffing box,packed | Hard iron |
3A | 2 | 3861-117 | 648401016 | Bolt,stuffing box | Stl |
Description Sandman™ offers Shaft 24028-33 (656420007) Mission XP Pump Shaft Inspection: Check for runout to see that the shaft has not been bent. If runout exceeds 0.003 inch, replace the shaft. Bearing seat area and oil seal area must be smooth and free of scratches or ...
Description Sandman™ Mission Centrifugal Mud Pump Casing Tobee manufacture Mission centrifugal pumps and parts ,100% interchangeable for below model: Mission Centrifugal pumps Magnum type 3x2x13, 2500 Supreme 3x2x13, Sandmaster 3x2x13 Mission Centrifugal pumps Magnum type ...
Description 19122-01-30A Casing All of the pumps feature a concentric casing. This casing averages 37% thicker than conventional pump casings, and up to 50% thicker for the larger, mud pumping models. They are pressure rated at 1 .5 times the flange rating and are designed with ...
Tobee® provides 19116-XX-30 Impeller for Mission centrifugal pump 8 x 6 19116-54-30 Impeller 8 x 6 – 9.5″ 19116-50-30 Impeller 8 x 6 – 9″ 19116-A0-30 Impeller 8 x 6 – 14″ 19116-94-30 Impeller 8 x 6 – 13.5″ WPForms 19116-90-30 Impeller 8 x 6 – 13″ ...
Sandman™ Mission Magnum XP 14x12x22 centrifugal frac pump • 27% High Chrome Pump Parts • Mechanical Seal Arrangement • Semi type and Open type impeller design Mission Magnum XP Blender Pumps XP Centrifugal Pumps Main Parts • Heavy Duty Pedestal – heavy duty frames ...