Model | HZ-R1325 |
Working size | 1300*2500*200mm |
Spindle |
3.2kw water-cooled spindle,
optional 3.5kw, 4.5kw 5.5kw, 7.5kw spindle or air-cooled spindle |
Spindle speed | 0-24000rpm/min |
Drive system | Leadshine driver and step motors, optional servo motors |
Max traveling speed | 30000mm/min |
Working speed | 0-20000mm/min |
Machine structure | Steel structure bed, aluminum profile with PVC countertop |
Structure | Thick and reinforced square tube welding |
Countertop material | T-slot thickened aluminum profile with PVC countertop |
Material fixing | Use Fixture |
Tool sensor | Auto Tool sensor |
Transmission | High-precision helical rack gear, Good quality Square Linear guide, TBI Ball Screw |
Oiler | Auto oil lubrication system |
Inverter | 3.7kw Fuling inverter, optional 5.5kw |
Control system | RichAuto DSP Controller |
1 MACHINE CONFIGURATION: ● Spindle: 1.5KW Chinese Spindle (Italy spindle is optional) ● Driving System: Stepper motor and leadshine driver ( Servo motor and driver is optional ) ●Controller: Weihong NK 105 DSP (NK 200,NC-studio,mach 3 is optional) ● Table Structure: ...
Original Richauto A11 CNC Handle DSP Controller System for 3 Axis CNC Router Control New version RichAuto A11E A11S with USB interface DSP is short for digital signal processing. This A11 version DSP CNC controller is the updated controller on the base of 0501 DSP, they are ...
Full set NK105 controller contains 3 parts: 1) Handle / hand-held motion controller 2) Mother card / control card 3) USB communication cable 0.8m Features of CNC Router DSP NK105G2 1) It is a 3-axis motion controller forcnc router. 2) Separated Design Protect control ...
Full set RichAuto DSP motion control system contains 4 parts, they are 1. Handle / hand-held motion controller 2. Mother card / interface board 3. 50-pin data transmission cable 4. USB communication cable Features of CNC Router DSP A11 and 0501 ...