DTSD1352 din rail mounted three phase energy power monitoring meter for solar power system with CE approval

General

ADL3000-E power analyzer specializes in measuring the data of all kinds of AC networks. It can be used for local display, or it is connected with the control equipment in measuring and controlling system. They comply EN 61326:2006 and EN 61010-1:2001.
They are a kind of programmable analyzer. With the 2 key on the front, we can choose to read the data that we need. They can be equipped RS-485 communication Modbus-RTU.
They are a kind of analyzer with excellent cost performance, since they regroup the functions of traditional electric transmitter and digital meters. Therefore they are widely being used in kinds of control system, SCADA system and power management system.

Features

● AC 3×220/380V，3×380V，3×57.7/100V，3×100V
● 3×1（6）A，3×10（80）A
● U、I、P、Q、S、PF、kWh、kvarh
● RS485(MODBUS-RTU)
● LCD display
● Frozen data
● 2-31st Harmonics
● Alarm
● kWh Class 0.5S,kVarh Class 2

Technical Parameters

Voltage	Reference voltage	3*57.7/100V, 3*220/380V, 3*100V, 3*380V
Reference frequency	45-65 Hz
Consumption	<10VA( Single phase)
Current	Maximum	6A,80A
Starting current	Direct connect:0.004 Ib Connect via:0.001 In
Consumption	<4VA(Single phase rated current)
Measurement performance	Accuracy of active kWH	Class 0.5S
Standards complicant	IEC 62053-21:2003
Pulse	Pulse width	80+20 ms
Pulse constant	400 imp/kWH 6400 imp/kWH
Communication	Interface	RS485
Protocol	Modbus-RTU
Outling	L*W*H(mm)	127*88*70
Environment	Temperature	Operating:-25℃~55℃；Storage:-40℃~70℃
Humidity	≦95% (No condensation)
Altitude	<2000m