The Fujikura 70S is a fully ruggedized, core alignment fusion splicer, providing consistent, low loss, splice performance.
A new programmable "automatic wind protector" closes and begins the splicing process after clamping the fibers in position or pressing the "set" button. Once the splice is completed, not only is the wind protector opened, but one of the sheath clamps, you decide which, is automatically raised making removal of the fibers fast and easy!
Similarly, the "clamshell" design of the tube heater clamps the splice splice protection sleeve and applies heat from both sides which results in a reduced shrink time of just 14 seconds!
Applicable fibers | Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655) |
Cladding dia. | 80-150um |
Cleave length | 5mm to 16mm with sheath clamp |
Splice mode / heating mode | Total 100 splice modes / 30 heating modes |
Splice loss | 0.02dB (SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS) Measured by cut-back method relevant to ITU-T and IEC standards. |
Attenuation splice function | Intentional high splice loss of 0.1dB to 15dB(0.1dB step) can be made for an in-line fixed attenuator. |
Splice time / tube heating time | Typical 7sec with SM / Typical 14sec with FP-03 (60mm) sleeve |
Splice result storage | Last 2000 splices |
Viewing methods / magnification | 2 axis CMOS camera with 4.73” color LCD. X / Y (320X magnification), or both X and Y simultaneously (200X magnification) |
Tension test | 1.96 to 2.25N |
Applicable protection sleeve | 60mm, 40mm and Fujikura micro sleeves |
No. of splice / heating per battery full charge | Typical 200 cycles with BTR-09 |
Electrode life | 3000 splices |
Size / weight | 146W x 159D x 150H (mm) / 2.7kg (including battery) |
Operating condition | Altitude : 0 to 5,000m above sea level, Wind : 15m/sec Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew |
Resistance features*1 | Shock : 76cm (30inch) all surface drop Dust : Exposure to dust (0.1 to 500um dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2 |
Other features | PC software upgrade / data management |
Terminals | USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for HJS-02 or HJS-03 power supply |
1) 70S Fusion Splicer (main machine)
2) BTR-09 Battery
3)DCC-18 Battery Charge Cord,
4) CT30A Cleaver
5) ADC-18 AC Adapter
6) ACC-14 AC Cord,
7)ELCT2-20A Spare Electrodes (pair),
8) S70A Sheath Clamp,
9)USB Cable, Alcohol Dispenser
10)Screw Driver
11) Splicer Carrying Strap
12)Quick Reference Guide
13)Video Instruction Manual and CC30 Transit Case with Carrying Strap