HY-FLF-S Manual Aluminum-alloy Air Damper
HY-FLF-D Motorized Aluminum-alloy Air Damper
1. The blade is made of high-strength aluminum alloy of wing-shaped profiles. The frame is made of high-strength aluminum alloy profiles. It is elegant appearance and good anti-corrosion.
2. Engineering plastic gear is used for twirling among blades, and it is anti-corrosion and wear-resistant.
3. The gear is hidden in the aluminum-alloy frame where is difficult for dust accumulated and other particles entry. So the gear is protected and that it can be switched flexibly and reliably.
4. The seal of damper is with temperature-resisting rubber, so it is low leakage.
5. The effective height of damper should be increased and/or decreased according to the blade modules, which is 100*N+10 mm (N is the number of blade).
6. Driving mode: manual and motor-driven.
7. Working environment temperature: -40°C~80°C.
8. Driving torque:
Area (m2) | ≤0.8 | 0.8-1.5 | 1.5-3.0 |
Torque (Nm) | 5 | 12 | 20 |
9. The Max. allowed static pressure is related with effective width. The following diagram is for Max. allowed static pressure. Ordinarily, if the effective width >1250m, it should be with combined damper structure.
More Product Picture:
Our company developped this innovative product based on years of onsite application experience. The inside pipe is made of 100% homogeneous alluminum alloy instead of physical connection of copper and alluminum pipe. ...
Compact designed and light noise. Normally 3 pcs per air conditioner: inner-outer cycling, mode, temperature. HuaHui A/C actuators are widedly applied on some Korea and European cars There are three type of rotation and two output avaible for choose. 5 pins design, matched with ...
the special material for the fin in air-con manufacturing.in order to improve its surface properties, we produce bare fin also hydrophilic foils which are coated by organic or unorganic materials in different ...
It can change the airflow direction into three ways. It is the best choice of controlling volume damper. ...
The combined air damper of HY-ZF can meet the requirement of ventilation equipment and smoke extraction equipment in the subway, because it uses the parts of single damper which is heat resisting(-50°C~+285°C) and low leakage and electric actuator which is with heat ...
HY-FYD-S Handle type butterfly round air damper 1. Single plate structure without flange. Handle type. 2. According to old standard, the length of damper body is 150mm. 3. The size of this structure should not be too large. HY-FYD-L Chain type butterfly round air damper 1. ...
HY-FDF-Q Structure Size: Flow Parameter: Installation Instruction: 1. The installation of HY-DF-Q is quite convenient. There is flange at the both ends of the damper, which can ensure that the joint is gas tightness. If there is no flange, the joint can be also gas tightness by ...
HY-F series air flow control damper is generally composed of frame, blade, blade shaft, bearing, coupling rod, rubber sealing element and drive device, etc. Among them, the drive device has three types of hand operated, air-operated and electric control. Moreover, the main ...
FUNCTION:fire proof Model Number:RHFF-Z Brand Name:RH Place of Origin:Shandong China (Mainland) Air damper Prevent air regorge when the blower stops work The valve is mounted on the level ...